SNY_1052-2_N04_GB_100x100 2006.08.24 19:05 Page 1
Features
GB
• Exclusively for use with SANYO NiMh (Nickel Metal
Hydride) AA and AAA (HR-3U
rechargeable batteries.
&
HR-4U) sized
• AA & AAA mixed batteries cannot be charged together in
one channel and single batteries cannot be charged in
one channel.
AA/AAA Charger Ni-MH
Model: MQN04
Operating Instructions
HOW TO INSERT THE BATTERIES
Please charge 2 to 4 batteries simultaneously.
AA type
Thank you for purchasing this SANYO product. Please
read and understand these instructions carefully to ensure
safe and satisfactory operation. Keep these instructions
handy for future reference.
Specifications
Sanyo Model No. NC-MQN04E / NC-MQN04B
Voltage
Input
AC 230V
50Hz
W
Output
DC 2.4V
250mA x 2(AA)
120mA x 2(AAA)
LED (charger indicator light)
AAA type
LED Indicator
ON - charging
OFF - Timer off (approx. 16hours)
eneloop Ni-MH AA (typ. 2000mAh) 10(h)
eneloop Ni-MH AAA (typ. 800mAh) 8(h)
Battery /
Charge time
approximate
hours
Ni-MH AA (typ. 2700mAh)
Ni-MH AA (typ. 2500mAh)
Ni-MH AA (typ. 1700mAh)
Ni-MH AAA (typ. 1000mAh)
Ni-MH AAA (typ. 900mAh)
13(h)
12(h)
8(h)
10(h)
9(h)
AA and AAA type batteries cannot be charged by two
slots of one side of a charger together. A battery cannot
be charged also when it is set by only one battery
Dimensions (L x W x H)
Weight
118 x 75 x 40 mm
approx. 230 g.
* The above charging times are estimated hours to
complete charging. The LED Indicator remains lit
even after these charging times have elapsed.
A
protection timer switches the LED off after approx
16hrs of continuous charging in an electrical outlet.
|