LCD TV
quick start guide
imagine the possibilities
Thank you for purchasing a Samsung product.
To receive a more complete service, please
register your product at
CONNECTINg A CABLE BOX/SATELLITE RECEIVER (SET-TOP BOX)
VIA DVI
ꢀ
CABLE BOX/SATELLITE
RECEIVER(SET-TOP BOX)
REAR PANEL
2
TV REAR PANEL
ꢀ. Connect an HDMI Cable(Not supplied) between the HDMI IN 2 jack on the TV and the HDMI jack on the Cable
Box/Satellite receiver (Set-Top Box).
2. Connect Audio Cables(Not supplied) between the DVI IN (HDMI 2) [R-AUDIO-L] jack on the TV and the Cable
Box/Satellite receiver (Set-Top Box).
N
When using an HDMI/DVI cable(Not supplied) connection, you must use the HDMI IN2 jack.
CONNECTINg A CABLE BOX/SATELLITE RECEIVER (SET-TOP BOX)
VIA COMPONENT CABLES
CABLE BOX/SATELLITE
RECEIVER (SET-TOP BOX)
REAR PANEL
2
ꢀ
TV REAR PANEL
ꢀ. Connect a Component Cable(Not supplied) between the COMPONENT IN (ꢀ or 2) [Y, PB, PR ] jacks on the TV and
the COMPONENT jacks on the Cable Box/Satellite receiver (Set-Top Box).
2. Connect Audio Cables(Not supplied) between the COMPONENT IN (ꢀ or 2) [R-AUDIO-L] jacks on the TV and the
AUDIO OUT jacks on the Cable Box/Satellite receiver (Set-Top Box).
English - 2
MemorizingtheChannels
Your TV can memorize and store all of the available channels for both “off-air” (Air) and “Cable” channels. After the
available channels are memorized, use the CH or CH button to scan through the channels. This eliminates the
need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a
broadcast source, memorizing the channels (automatic) and adding or deleting channels (Channel Manager).
Selecting the Video Signal-source
TV
Channel
Air / Cable
:
Air
Before your television can begin memorizing the available channels, you must
specify the type of signal source that is connected to the TV (i.e. an Air or a
Cable system).
Auto Program
Channel Manager
Fine Tune
Color System
: Auto
ꢀ. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER
button.
Move
Enter
Return
2. Press the ENTER
Repeatedly press the ▲ or ▼ button to cycle through these choices: “Air”, “STD”, “HRC”, or “IRC” (all cable TV)
Press the ENTER button to select.
button.
N
STD, HRC and IRC identify various types of cable TV systems.
Contact your local cable company to identify the type of cable system that exists in your particular area.
At this point, the signal source has been selected
Storing Channels in Memory (Automatic Method)
TV
Channel
Air / Cable
:
Air
ꢀ. First, select the correct signal source (Air, STD, HRC, or IRC).
Auto Program
Channel Manager
Fine Tune
2. Press the ▲ or ▼ button to select “Auto Program”, then press the ENTER
Color System
: Auto
Enter
button.
3. Press the ENTER
button to select “Start”.
The TV will begin memorizing all of the available channels.
Move
Return
N
The TV automatically cycles through all of the available channels and stores
them in memory. This takes about one to two minutes. Press the ENTER
process and return to the “Channel” menu.
button at any time to interrupt the memorization
4. After all the available channels are stored, the “Channel” menu reappears. Press the EXIT button to exit.
To stop the search before it has finished, press the ENTER button with “Stop” selected.
N
English - 3
Troubleshooting
My TV is out of order.
Why?
Try this.
TV HD is displayed, but
the visual quality is not
good.
• The visual quality may be degraded
when the broadcasting stations convert
the analog signal to digital. (Although
you are watching digital broadcasting,
the video source is analog.)
• Check the transmitting signal of the
corresponding cable TV network or
broadcasting station.
The picture on the
TV screen is broken
intermittently (a mosaic or
distorted).
• This may occur when the broadcast
signal received by the TV is too weak
or unstable.
• Check the transmitting signal of the
corresponding cable TV network or
broadcasting station.
• If you are using a publically shared
antenna, check the signal by asking
your apartment manager.
I cannot control the TV
• When the battery is flat.
• Replace the battery and then retry.
using the remote control.
• When it is not in TV mode.
• Press the TV button on the remote
control to select TV mode.
• When the remote control malfunctions
temporarily.
A strange sound is
generated by the TV.
• Sound may be generated by the
temporary swelling and shrinking of the
plastics in the TV due to temperature
and humidity changes.
• Some noise can be heard due to the
characteristics of the product.
• Temporary electronic oscillation
sounds may be generated due to the
characteristics of the TV
English - 4
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.
Country
Web Site
Customer Care Center
ARgENTINE
0800-333-3733
0800-124-421
4004-0000
BRAZIL
CHILE
COLOMBIA
800-SAMSUNg(726-7864)
01-8000112112
-
COSTA RICA
ECUADOR
0-800-507-7267
1-800-10-7267
EL SALVADOR
gUATEMALA
HONDURAS
JAMAICA
800-6225
1-800-299-0013
800-7919267
1-800-234-7267
800-7267
-
PANAMA
PUERTO RICO
REP. DOMINICA
NICARAgUA
MEXICO
1-800-682-3180
1-800-751-2676
00-1800-5077267
01-800-SAMSUNg(726-7864)
1-800-SAMSUNg(726-7864)
0-800-100-5303
TRINIDAD & TOBAgO
VENEZUELA
IMPORTADO POR:
AV. PRESIDENTE MASARIK #111 INT701
COL. CHAPULTEPEC MORALES C.P.11570
DELEgACION MIgUEL HIDALgO MEXICO. DISTRITO FEDERAL
Tel: 01-55-5747-5100 / 01-800-726-7864
|