Samsung Blu ray Player BD F5700 User Guide

BD-F5700

™

Blu-ray Disc Player

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

ENGLISH

12. Use only with the cart,

stand, tripod, bracket,

• Disc Storage

` Do not keep in direct sunlight.

Contents

or table specified by

` Keep in a cool ventilated area.

the manufacturer,

` Keep in a clean protection jacket and

SAFETy INFORmATION

Language Settings.....................................14

Security Settings........................................14

General Settings........................................15

Support Settings .......................................15

or sold with the

store vertically.

Warning.......................................................2

Precautions .................................................2

Disc Storage & Management.......................3

Handling Cautions .......................................3

apparatus. When

a cart is used, use

Handling Cautions

caution when moving the cart/apparatus

combination to avoid injury from tip-over.

• Do not expose this apparatus to dripping

or splashing. Do not put objects filled with

liquids, such as vases on the apparatus.

mEdIA pLAy

13. Unplug this apparatus during lightning

storms or when unused for long periods

of time.

Playing a Commercially Recorded Disc......16

Playing Files on a USB Device ...................16

Playing a Disc with User Recorded Content ..16

Playing Content Located in Your PC..........17

Controlling Video Playback ........................17

Controlling Music Playback........................17

Playing Photo Contents.............................18

• To turn this apparatus off completely, you

must pull the power plug out of the wall

socket. Consequently, the power plug must

be easily and readily accessible at all times.

GETTING STARTEd

14. Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as when the power-supply

cord or plug is damaged, liquid has

been spilled or objects have fallen into

the apparatus, the apparatus has been

exposed to rain or moisture, does not

operate normally, or has been dropped.

Before using the User Manual......................4

Logos of Discs the player can play ..............4

Accessories.................................................6

Front Panel..................................................6

Rear Panel...................................................6

Remote Control...........................................7

• Do not plug multiple electric devices into

the same wall socket. Overloading a socket

can cause it to overheat, resulting in a fire.

• Before connecting other components to

this player, be sure to turn them off.

AppENdIx

•

If you move your player suddenly from a cold

place to a warm place, condensation may

occur on the operating parts and lens and

cause abnormal disc playback. If this occurs,

unplug the player, wait for two hours, and

then connect the plug to the power outlet.

Then, insert the disc, and try to play back

again.

CONNECTIONS

Troubleshooting.........................................19

Specifications............................................20

Connecting to a TV......................................7

Connecting to an Audio System ..................8

Connecting to a Network Router .................8

Disc Storage & Management

• Holding Discs

Fingerprints or scratches

on a disc may reduce

sound and picture quality

or cause skipping

SETTINGS

• If the product makes an abnormal noise

or produces a burning smell or smoke,

turn off the power switch immediately and

disconnect the power plug from the wall

outlet. Then, contact the nearest customer

service center for technical assistance. Do

not use the product. Using the product as

it is may cause a fire or an electric shock.

The Initial Settings Procedure.......................9

Menu Navigation..........................................9

Accessing the Settings Menu ....................10

Display Settings.........................................10

Audio Settings...........................................11

Network Settings.......................................12

System Settings ........................................14

Avoid touching the surface of a disc

where data has been recorded.

Hold the disc by the edges so that

fingerprints will not get on the surface.

Do not stick paper or tape on the disc.

• Cleaning Discs

If you get fingerprints or dirt

on a disc, clean it with a mild

detergent diluted in water

and wipe with a soft cloth.

user's manual may be reproduced or copied

without the prior written permission of

Samsung Electronics Co.,Ltd.

When cleaning, wipe gently

from the inside to the outside of the disc.

Region Code

Supported File Formats

Getting Started

Both players and discs are coded by region.

These regional codes must match for a disc

to play. If the codes do not match, the disc

will not play.

Notes on the USB connection

Before using the User Manual

• Your player supports USB storage media,

MP3 players, digital cameras, and USB

card readers.

The Region Code for this player is displayed

on the rear panel of the player.

disc Types and Contents your player can play

• The player does not support folder or file

names longer than 128 characters.

Media

Disc Type

Details

Region

Disc Type

Area

•

Some USB/External HDD/digital camera

Code

Blu-ray Disc

BD-ROM or BD-RE/-R recorded in the BD-RE format.

devices may not be compatible with the player.

North America, Central

DVD-VIDEO

DVD-RW

DVD-R

• Your player supports the FAT16, FAT32,

Blu-ray

Disc

America, South America,

Korea, Japan, Taiwan, Hong

Kong and South East Asia.

DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have

been recorded and finalized, or a USB storage media containing MKV

or MP4 contents.

and NTFS file systems.

VIDEO

•

Connect USB devices directly to the player’s

USB port. Connecting through a USB cable

may cause compatibility problems.

DVD+RW

DVD+R

DVD-

The U.S., U.S. territories and

• Inserting more than one memory device

into a multi-card reader may cause the

reader to operate improperly.

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

VIDEO

Canada

Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB

storage media containing MP3 or WMA contents.

MUSIC

•

The player does not support the PTP protocol.

Logos of Discs the player can play

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB

storage media containing JPEG contents.

• Do not disconnect a USB device during a

PHOTO

"loading" process.

• The bigger the image resolution, the longer

the image takes to display.

NOTES

✎

• This player cannot play MP3 files with DRM

(Digital Rights Management) downloaded

from commercial sites.

The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.

If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.

Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.

Blu-ray Disc

BD-LIVE

•

Your player only supports video with a

frame rate under 30fps (frames per second).

Your player will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds

• Your player only supports USB Mass

Storage Class (MSC) devices such as

thumb drives and USB HDD. (HUB is not

supported.)

25 Mbps.

NTSC broadcast system in U.S.A, Canada, Korea, Japan

Playback may not work for some types of discs, or when you use specific functions, such as angle change

and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to

this if necessary.

• Certain USB HDD Devices, multi-card

readers and thumb drives may not be

compatible with this player.

When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.

disc types your player cannot play

• If some USB devices require excessive

power, they may be limited by the circuit

safety device.

• HD DVD

• DVD-RAM

• DVD-RW (VR mode) • 3.9 GB DVD-R for

Authoring.

• DVD-ROM/PD/

• Super Audio CD

• CVD/CD-ROM/

CDV/CD-G/CD-I/LD

(CD-Gs play audio

only, not graphics.)

MV, etc

(except CD layer)

• If playback from a USB HDD is unstable, provide additional power by plugging the HDD into

a wall socket.

• Video decoder

- Supports up to H.264 Level 4.1 and AVCHD

- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4

If the problem continues, contact the USB HDD manufacturer.

• You must remove the USB storage device safely by performing the "Safely Remove USB"

function to prevent possible damage to the USB memory.

- MPEG4 SP, ASP :

Below 1280 x 720 : 60 frames max

Above 1280 x 720 : 30 frames max

Press the HOmE button to move to the home screen, press the yELLOW (C) button, and

then press the v button.

- Does not support GMC 2 or higher

• SAMSUNG is not responsible for any data file damage or data loss.

• Audio decoder

• Your player does not support NTFS compressed files, sparse files, or encrypted files.

• You can repair or format a USB device on your Desktop PC. (MS-Windows OS only)

- Supports WMA 7, 8, 9 and STD

- Does not support WMA sampling rate of 22050Hz mono.

- AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96)

Video File Support

Max bitrate: 320kbps

File Extension

Container

Video Codec

MP4v3

Audio Codec

Resolution

1920x1080

Music File Support

MP3

Dolby Digital

DTS

File Extension

Container

Audio Codec

Support Range

*.avi

AVI

*.mp3

MP3

WMA

1920x1080

H.264 BP/MP/HP

PCM

* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48

*.wma

WMA

* Bit rates - All bit-rates from 5kbps to 355kbps

MP3

Dolby Digital

DTS

WMA

1920x1080

VC-1 AP

*.mkv

MKV

H.264 BP/MP/HP

Picture File Support

1920x1080

VC-1 AP

*.wmv

*.mp4

WMV (wmv9)

MP4

File Extension

Type

Resolution

15360x8640

VC-1 SM

*.jpg

*.jpeg

*.jpe

MP4 (mp4v)

H.264 BP/MP/HP

MPEG1

AAC

MP1, 2

Dolby Digital

DTS

JPEG

PNG

*.mpg

MPEG2

*.png

*.mpeg

H.264 BP/MP/HP

• Limitations

- Even when a file is encoded by a supported codec listed above, the file might not be

played if its content has a problem.

- Normal playback is not guaranteed if the file’s container information is wrong or the file

itself is corrupted.

- Files having a higher Bit rate/frame rate than standard may stutter during sound/video playback.

- The Seek (skip) function is not available if the file’s index table is damaged.

AVCHd (Advanced Video Codec High definition)

Front Panel

• This player can play back AVCHD format discs. These discs are normally recorded and used

PLAY/PAUSE BUTTON

in camcorders.

• The AVCHD format is a high definition digital video camera format.

STOP BUTTON

• The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the

conventional image compressing format.

OPEN/CLOSE BUTTON

POWER BUTTON

• Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs that

use "x.v.Color" format.

• "x.v.Color" is a trademark of Sony Corporation.

• "AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd.

and Sony Corporation.

NOTES

✎

Some AVCHD format discs may not play, depending on the recording condition.

AVCHD format discs need to be finalized.

"x.v.Color" offers a wider color range than normal DVD camcorder discs.

Some MKV and MP4 format discs may not play, depending on the video resolution and frame rate condition.

USB HOST

REMOTE CONTROL SENSOR

Accessories

Check for the supplied accessories shown below.

DISC TRAY

NOTES

✎

When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button

on the player or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and

then press the

button.

You can perform software upgrades using the USB Host jack with a USB flash memory stick only.

REPEAT

LIGHT

VIEW

A-B

Rear Panel

Batteries for Remote Control

(AAA Size) (4301-000121)

User Manual

(AK68-02285U)

Remote Control

(AK59-00172A)

HDMI OUT

LAN

DIGITAL AUDIO OUT

Remote Control

Connections

Tour of the Remote Control

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to

the HDMI IN jack on your TV.

Turn the player on and off.

Turn the TV on and off.

Do not connect the power cord to the wall outlet until you have made all the other

connections.

After setup, allows you to set the input

source on your TV.

TV volume adjustment.

Press to open and close the disc tray.

When you change the connections, turn off all devices before you start.

Press the number buttons to operate options.

Use to enter the disc menu.

Use to enter the popup menu/title menu.

Press to skip backwards or forwards.

Press to search a disc backwards or

forwards.

Audio

Video

Press to stop a disc.

Press to play a disc.

Press to pause a disc.

Press to move to the Home menu.

Press to switch the Blu-ray Disc/DVD’s

Use to access various audio functions on a

subtitle language.

disc (Blu-ray Disc/DVD).

Press to use the Tools menu.

Use to display the playback information

when playing a Blu-ray Disc/DVDs.

Use to select menu items and change menu

values.

Press to exit the menu.

Return to the previous menu.

Press to backlight the buttons on the remote

control. This function is convenient for using

at night or when the room is dark.

(If this button is set to On, battery usage

time will be reduced.)

NOTES

✎

These buttons are used both for menus on the

player and also several Blu-ray Disc functions.

If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio

Out on the player to an audio system to hear audio.

BONUS REPEAT REPEAT LIGHT

VIEW

A-B

Press to use bonusview function.

Allows you to repeat A-B disc.

Allows you to repeat a title, chapter, track or

disc.

An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.

Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of

your TV.

When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the

first time, the player automatically sets the HDMI output resolution to the highest supported by the TV.

NOTES

✎

Installing batteries

If the remote does not operate properly:

A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.

•

Check the polarity (+/–) of the batteries.

Check if the batteries are drained.

Check if the remote sensor is blocked by

obstacles.

To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed (category 2)

HDMI cable.

HDMI outputs only a pure digital signal to the TV.

•

Check if there is any fluorescent lighting nearby.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on

the screen.

CAUTION

Dispose of batteries according to local environmental

regulations. Do not put them in the household trash.

Connecting to an Audio System

Connecting to a Network Router

You can connect the Blu-ray player to an audio system using one of the methods illustrated

You can connect your player to your network router using one of the methods illustrated below.

below.

To use the DLNA network functionality, you must connect your PC to your network as shown

ⁱW^{n t}i^hr^eeⁱd^llusN^tre^att^iowⁿo^s.rk

Do not connect the power cord to the wall outlet until you have made all the other

connections.

When you change the connections, turn off all devices before you start.

method 1 Connecting to an HdmI supported AV receiver

• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product

to the HDMI IN jack on your receiver.

• Best quality (Recommended)

Broadband modem

(with integrated router)

method 2 Connecting to an AV receiver with dolby digital or a dTS decoder

Broadband

service

• Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio Out jack on the

product to the Digital Coaxial In jack of the receiver.

• Good quality

• You will hear sound only through the front two speakers with Digital Output set to PCM.

Router

Broadband

service

Broadband

modem

Method 1

Audio

Method 2

Audio

NOTES

✎

Internet access to Samsung's software update server may not be allowed, depending on the router you use or your

ISP's policy. For more information, contact your ISP (Internet Service Provider).

DSL users, please use a router to make a network connection.

Wireless Network

Settings

If you leave the player in the stop mode for

more than 5 minutes without using it, a screen

saver will appear on your TV. If the player is

left in the screen saver mode for more than 25

minutes, the power will automatically turn off.

The Initial Settings Procedure

•

The Home screen will not appear if you do not

configure the initial settings.

The OSD (On Screen Display) may change in this

player after you upgrade the software version.

Menu Navigation

Wireless Router

The access steps may differ depending on the

menu you selected.

After the initial settings process is complete, you can

then operate the panel buttons and remote control.

Broadband service

The Initial Settings Procedure appears when

you turn on player for the first time and lets you

set the OSD and menu languages, configure

the connection to your home network, and

choose the aspect ratio output (screen size

and format) that is correct for your TV. Follow

the directions that appear on the screen.

NOTES

✎

If your wireless router supports DHCP, this player can use a DHCP or static IP address to connect to the wireless

network.

Set your wireless router to Infrastructure mode. Adhoc mode is not supported.

The player supports only the following wireless security key protocols:

HOME Button : Press to move to the Home

menu.

NOTES

WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)

✎

RETURN Button : Return to the previous menu.

The Home menu will not appear if you do not

Select a channel on the wireless router that is not currently being used. If the channel set for the wireless router is

configure the initial settings except as noted below.

currently being used by another device nearby, it will result in interference and communication failure.

(Enter) / DIRECTION Button :

If you press the BLUE (D) button during

In compliance with the newest Wi-Fi certification specifications, Samsung Blu-ray players do not support WEP or

TKIP security encryption in networks running in the 802.11n mode.

Move the cursor or select an item.

Activate the currently selected item.

Confirm a setting.

network setup, you can access the Home menu

even if the network setup is not completed yet.

Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router performance,

When you return to the Home menu, the full

screen mode is cancelled automatically.

distance, obstacles, interference by other radio devices, etc).

EXIT Button : Press to exit the current menu.

If you want to display the Initial Setting screen

again to make changes, press the button on

• Home menu

the front panel of the player for more than 5

seconds with no disc inserted. This resets the

player to its default settings.

Videos

Photos

Music

Settings

After the initial settings process is complete, you

can operate the HDMI-CEC function.

If you want to use the Anynet+(HDMI-CEC)

function to aid in the initial set up process,

please follow the instructions below.

HD Movies

CinemaNow

Netflix

VUDU

CinemaNow

Pandora

1) Connect the player to an Anynet+(HDMI-

CEC) compliant Samsung TV using HDMI Cable.

No Disc

Change Device

View Devices

Enter

2) Set the Anynet+(HDMI-CEC) feature to On in

both the TV and the player.

3) Set the TV to the Initial Settings Procedure.

NOTES

✎

Resolution

Selects Music.

Selects Settings.

The access steps may differ depending on

If the TV you connected to the player does not

Lets you set the output resolution of the HDMI

video signal to Auto, 1080p, 1080i, 720p or

480p. The number indicates the number of

lines of video per frame. The i and p indicate

interlaced and progressive scan, respectively.

The more lines, the higher the quality.

the menu you selected. The OSD (On Screen

Display) may change in this player after you

upgrade the software version.

support Movie Frame or the resolution you

selected, the message "If no pictures are shown

after selecting ‘Yes’, please wait for 15 seconds

to return to the previous resolution. Do you

want to change the resolution?" appears. If you

select Yes, the TV’s screen will go blank for 15

seconds, and then the resolution will revert to

the previous resolution automatically.

Displays the buttons you can use on the

remote to access functions.

Display Settings

Selects applications.

Selects Videos.

Selects Photos.

Resolution according to the output

You can configure various display options

such as the TV Aspect Ratio, Resolution, etc. mode

If the screen stays blank after you have

changed the resolution, remove all discs,

TV Aspect Ratio

• Blu-ray disc/E-contents/digital Contents

and then press and hold the button on the

playback

NOTES

✎

front of the player for more than 5 seconds.

All settings are restored to the factory default.

Follow the steps on the previous page to

access each mode and select the Display Setup

that your TV will support.

Depending on the type of television you have,

you may want to adjust the screen size setting.

The Videos, Photos, and Music options require

that you have an appropriate disc inserted into

the player or a USB flash device attached to

the player.

HDMI / connected

HDMI Mode

Output

NOTES

✎

E-contents/

Setup

Depending on the disc type, some aspect

ratios may not be available.

Blu-ray Disc

Digital

When the factory default settings are restored,

all stored user BD data is deleted.

contents

If you select an aspect ratio and option which is

different than the aspect ratio of your TV screen,

the picture might appear to be distorted.

Accessing the Settings Menu

The Blu-ray Disc must have the 24 frame feature

for the player to use the Movie Frame (24Fs) mode.

Resolution of

BD Wise

1080p

Blu-ray Disc

To access the Settings menu and sub-menus,

Max. Resolution Max. Resolution

follow these steps:

Auto

movie Frame (24Fs)

Bd Wise (Samsung TVs only)

of TV input

1080@60F

of TV input

1080@60F

Press the pOWER button.

1080p@60F

Setting the Movie Frame (24Fs) feature to

Auto allows you to adjust the player’s HDMI

output to 24 frames per second for improved

picture quality.

BD Wise is Samsung’s latest inter-connectivity

feature.

The Home Menu appears.

(Movie Frame : Off)

Press the ◄► buttons to select Settings,

Movie Frame :

Auto (24Fs)

When you connect a Samsung player and a

Samsung TV with BD Wise to each other via

HDMI, and BD Wise is on in both the player

and TV, the player outputs video at the video

resolution and frame rate of the Blu-ray Disc/

DVDs.

1080@24F

1080p@24F

and then press the

button.

You can enjoy the Movie Frame (24Fs) feature

only on a TV supporting this frame rate.

You can select Movie Frame only when the

player is in the HDMI 1080i or 1080p output

resolution modes.

1080i

720p

480p

1080i

720p

480p

1080i

720p

480p

Press the ▲▼ buttons to select the

desired submenu, and then press the

button.

Press the ▲▼ buttons to select the desired

• dVd playback

item, and then press the

button.

NOTES

✎

HdmI Color Format

Output

Setup

HDMI / connected

Press the ExIT button to exit the menu.

When BD Wise is on, the Resolution setting

automatically defaults to BD Wise and BD Wise

appears in the Resolution menu.

HDMI Mode

Lets you set the color space format for

BD Wise

Auto

480i

HDMI output to match the capabilities of the

If the player is connected to a device that does not

support BD Wise, you cannot use the BD Wise function.

^cH^odⁿⁿm^ecI^ted^de^de^evp^iceC⁽o^TVl^,o^mr^{onitor, etc).}

Max. Resolution of TV input

1080p

1080i

1080p

1080i

720p

480p

For proper operation of BD Wise, set the BD

Wise menu of both the player and the TV to On.

720p

Lets you output video from the HDMI OUT jack with

Deep Color. Deep Color provides more accurate

color reproduction with greater color depth.

480p

* If Source Stream is 2ch, "Re-encoded

Dolby D" Settings are not applied.

progressive mode

pCm downsampling

Lets you improve picture quality when viewing DVDs.

Lets you choose to have 96KHz PCM signals

downsampled to 48KHz before they are

outputted to an amplifier. Choose only if your

amplifier or receiver is not compatible with a

96KHz signal.

Blu-ray Discs may include three audio streams :

Main Feature Audio : The audio soundtrack

of the main feature.

Audio Settings

BONUSVIEW audio : An additional

soundtrack such as the director or actor’s

commentary.

digital Output

dynamic Range Control

Lets you select the digital audio output format that is suitable for your TV or AV Receiver. For

more details, please refer to the Digital Output Selection table below.

Navigation Sound Effects : When you

choose a menu navigation selection, a

Navigation Sound Effect may sound.

Navigation Sound Effects are different on

each Blu-ray Disc.

Lets you apply dynamic range control to

Dolby Digital, Dolby Digital Plus, and Dolby

True HD audio.

digital Output Selection

• Auto : Automatically controls the dynamic

range of Dolby TrueHD audio, based

on information in the Dolby TrueHD

soundtrack.

Bitstream

(Re-encoded

DTS)

Bitstream

(Re-encoded

Dolby D)

Bitstream

NOTES

✎

Setup

PCM

(Unprocessed)

Be sure to select the correct Digital Output or

you will hear no sound or just loud noise.

HDMI supported

AV receiver or

Coaxial

Also turns dynamic range control on for

Dolby Digital and Dolby Digital Plus.

HDMI

HDMI Receiver or

Connection

Coaxial

Receiver

Coaxial

Re-encoded DTS

If the HDMI device (AV receiver, TV) is not

compatible with compressed formats (Dolby

Digital, DTS), the audio signal outputs as PCM.

• Off : Leaves the dynamic range uncompressed,

Re-encoded

Dolby Digital *

Re-encoded

Dolby Digital *

Re-encoded

Dolby Digital *

Re-encoded

Dolby Digital *

Re-encoded

Dolby Digital *

PCM

Dolby Digital

Up to 7.1ch PCM 2ch

PCM

PCM 2ch

letting you hear the original sound.

• On : Turns dynamic range control on for

all three Dolby formats. Quieter sounds

are made louder and the volume of loud

sounds is reduced.

PCM 2ch PCM 2ch Dolby Digital Dolby Digital Re-encoded DTS

Dolby Digital

Regular DVDs do not have BONUSVIEW audio

and Navigation Sound Effects.

Dolby Digital Plus PCM 2ch PCM 2ch

Dolby Digital Re-encoded DTS

Plus

Some Blu-ray Discs do not have BONUSVIEW

audio and Navigation Sound Effects.

Audio Stream

on Blu-ray

Disc

Dolby TrueHD

DTS

PCM 2ch PCM 2ch Dolby TrueHD Dolby Digital Re-encoded DTS

If you play MPEG audio soundtracks, the audio

signal outputs as PCM regardless of your

Digital Output selections (PCM or Bitstream).

downmixing mode

PCM 2ch PCM 2ch

DTS

Re-encoded DTS

PCM 2ch

Dolby Digital

DTS

DTS-HD High

Resolution

Audio

Lets you select the multi-channel downmix

method that is compatible with your stereo

system. You can choose to have the player

downmix to normal stereo or to surround

compatible stereo.

DTS-HD High

Re-encoded

PCM 2ch PCM 2ch

DTS

Resolution Audio

Dolby Digital *

If your TV is not compatible with compressed

multi-channel formats (Dolby Digital, DTS), the

player may output PCM 2ch downmixed audio

even though you selected Bitstream (either Re-

encoded or Unprocessed) in the setup menu.

DTS-HD Master

DTS-HD

Re-encoded

Dolby Digital *

PCM 2ch

PCM 2ch PCM 2ch

DTS

PCM 2ch

Audio

Master Audio

PCM 2ch

PCM

Audio Stream

on DVD

Dolby Digital

DTS

PCM 2ch PCM 2ch Dolby Digital Dolby Digital

Dolby Digital

PCM 2ch PCM 2ch

DTS

If your TV is not compatible with PCM sampling

rates over 48kHz, the player may output 48kHz

downsampled PCM audio even though you set

PCM Downsampling to Off.

Decodes main

feature audio and

BONUSVIEW audio

stream together into

PCM audio and add

Navigation Sound

Effects, then re-

encodes the PCM

audio into Dolby

Digital bitstream

Decodes main feature

Outputs only main feature audio and BONUSVIEW

audio stream so that your audio stream together

Decodes main feature

audio and BONUSVIEW AV receiver can decode the

into PCM audio

Definition for

Blu-ray Disc

Any

audio stream together

audio bitstream.

and add Navigation

into PCM audio and add You will not hear BONUSVIEW Sound Effects, then

Navigation Sound Effects. audio and Navigation Sound

Effects.

re-encodes the

PCM audio into DTS

bitstream

Select Connect button, and then press

the v button. The product detects the

wired connection, verifies the network

connection and then connects to the

network.

NOTE

Internet provider.

When finished entering all the values,

select OK, and then press the v

button. The player verifies the network

connection and then connects to the

network.

Network Settings

✎

Network Setting

You can get the Network values from your

Wireless network

setup

Please contact your ISP to find out if your IP

address is static or dynamic. If it is dynamic

- and most are - we recommend using the

Auto procedure for network setup. This is

easiest and will work in the majority of cases.

If it is static, you must use the manual set up

procedure.

iptime23

You can connect your Blu-ray

player to the internet. Please

select which wireless network

to use.

setup

solugen_edu#1

Wired - manual

WPS(PBC)

If you have a static IP address or the Automatic

procedure does not work, you'll need to set

the Network Settings values manually.

Move

Select

Return

Network setup directions start below.

Wireless Network

Select the desired network, and then

Follow Steps 1 and 2 in Wired Network, and

press the v button.

Configuring your Network

You can setup a wireless network connection

in four ways:

then follow these steps:

On the Security screen, enter your

network's Security Code or Pass

Phrase.

Connection

Select Network Status. The player

searches for a network, and then

displays the connection failed message.

Wireless Automatic

Wireless Manual

WPS(PBC)

Before you begin, contact your ISP to find out

if your IP address is static or dynamic. If it is

dynamic, and you have a wired or wireless

network, we recommend using the Automatic

configuration procedures described below.

Enter numbers directly using the number

buttons on your remote control. Enter

letters by selecting a letter with an arrow

button, and then pressing v button.

On the bottom of the screen, select Ip

Settings, and then press the v button.

The IP Settings screen appears.

WPS(PIN)

When you configure the wireless network

connection, any wireless network devices

currently connected through the player

or, if applicable, the player's current wired

connection, will be disconnected.

NOTE

✎

If you are connecting to a wired network,

connect the player to your router using a

LAN cable before you start the configuration

procedure.

Select the IP Setting field, and then

To view the password as you enter it, use the

arrow buttons to select Show Password on

the right side, and then press v button.

press the v button.

Select Enter manually in the IP Setting

field, and then press the v button.

If you are connecting to a wireless network,

disconnect any wired network connection

before you begin.

When done, select done and then press

the v button. The player verifies the

network connection and then connects

to the network.

Wireless - Automatic

Select a value to enter (Ip Address,

for example), and then press the v

button.

In the Home screen, select Settings,

To begin configuring your network connection,

follow these steps:

and then press the v button.

Use the number keypad on your remote

control to enter the numbers for the

value. You can also enter numbers using

the ▲▼ buttons. Use the ◄► buttons

on the remote control to move from

entry field to entry field within a value.

When done with one value, press the

v button.

When verification is complete, select

Select Network, and then press the v

OK, and then press the v button.

button.

Wired Network

NOTES

✎

Select Network Settings, and then

press the v button.

You should be able to find the Security Code or

Pass Phrase on one of the set up screens you

used to set up your router or modem.

Wired - Automatic

Select Wireless in the Network Settings

screen, and then press the v button.

The player searches for and then

In the Home screen, select Settings,

and then press the v button.

Wireless - manual

Press the ▲ or ▼ button to move

to another value, and then enter the

numbers for that value following the

instructions in Step 5.

displays a list of the available networks.

Select Network, and then press the v

If you have a static IP address or the

Automatic procedure does not work, you'll

need to set the Network Settings values

manually.

button.

Select Network Settings, and then

press the v button.

Repeat Steps 5 and 6 until you have

Select Wired in the Network Settings

filled in all values.

Follow the directions in Wireless -

screen, and then press the v button.

Automatic through Step 5.

The player searches for a network,

and then displays the connection failed

message.

11. When finished, select done at the right

of the screen, and then press the v

button.

Select Network, and then press the v • Allow (All) : The Internet connection is

button.

allowed for all BD-LIVE contents.

• Allow (Valid Only) : The Internet

connection is allowed only for BD-LIVE

contents containing a valid certificate.

Select Network Settings, and then

The player verifies the network

connection and then connects to the

network.

On the bottom of the screen, select

Ip Settings, and then press the v

button.

press the v button.

Select Wireless in the Network Settings

screen, and then press the v button.

The player searches for and then

• prohibit : No Internet connection is allowed

The IP Settings screen appears.

12. After the player verifies the network,

select OK, and then press the v

button.

for any BD-LIVE content.

Select the IP Setting field, and then

displays a list of the available networks.

NOTES

✎

press the v button.

Select the desired network, and then

What is a valid certificate?

Select Enter manually in the IP Setting

WpS(pBC)

press the ► button.

When the player uses BD-LIVE to send the

disc data and a request to the server to certify

the disc, the server uses the transmitted data

to check if the disc is valid and sends the

certificate back to the player.

field, and then press the v button.

Select the WpS(pIN), and then press

the v button. The PIN pop-up

appears.

In the Home screen, select Settings,

Select a value to enter (Ip Address, for

example), and then press v button.

Use the number keypad on your remote

control to enter the numbers for the

value. You can also enter numbers using

the ▲▼ buttons. Use the ◄► buttons

on the remote control to move from

entry field to entry field within a value.

When done with one value, press the

v button.

and then press the v button.

Select Network, and then press the v

Enter the PIN into the WPS PIN entry

field in the router's Set Up screen and

then save the the screen.

button.

The Internet connection may be restricted

Select Network Settings, and then

while you are using BD-LIVE contents.

press the v button.

NOTES

✎

Using Bd-LIVE™

Select Wireless in the Network Settings

Contact the manufacturer of the router for

instructions explaining how to access the

route's Set Up screens or refer to the router's

user's manual.

screen, and then press the v button.

Once the player is connected to the network,

you can enjoy various movie-related service

contents using a BD-LIVE compliant disc.

Press the ▲ button on your remote, and

then press the ► button to select the

WpS(pBC).

Press the ▲ or ▼ button to move

to another value, and then enter the

numbers for that value following the

instructions in Step 6.

For WPS connection, set your wireless router’s

security encryption to AES. Setting to WEP

security encryption does not support WPS

Attach a USB memory stick to the

USB jack on the front of the player, and

then check its remaining memory. The

memory device must have at least 1GB

of free space to accommodate the BD-

LIVE services.

Press the v button on your remote.

The "Press the PBC button" message

appears.

Netw^co^orⁿk^necT^tie^ons^.t

Repeat Steps 6 and 7 until you have

Press the WPS(PBC) button on your

router within two minutes. Your player

automatically acquires all the network

settings values it needs and connects to

your network.

filled in all values.

NOTES

✎

Use this menu item to check whether your

You can get the Network values from your

Internet provider.

Insert a Blu-ray Disc that supports BD-

ⁿN^ee^twtw^orko^cr^okⁿS^net^ca^tit^ouⁿs^{is working or not.}

LIVE.

The Network Status screen appears.

The player connects to the network after

the network connection is verified.

When finished, select OK, and then

press the v button. The Security

Screen appears.

Select an item from various BD-LIVE

service contents provided by the disc

manufacturer.

Use to check whether a connection to a

10. On the Security screen, enter your

network's Security Code or Pass

Phrase. Enter numbers directly using the

number buttons on your remote control.

Enter letters by selecting a letter with the

▲▼◄► buttons, and then pressing the

v button.

WpS(pIN)

ⁿB^ed^tw-^oL^rkiv^ae^ndI^tn^hete^Inr^tn^ereⁿt^etC^hao^sn^bn^eeeⁿc^et^si^to^abn^lished.

NOTES

✎

Before you begin, open the router's setup

menu on your PC and access the screen with

the WPS PIN entry field.

The way you use BD-LIVE and the provided

contents may differ, depending on the disc

manufacturer.

Set to allow or prohibit an Internet connection

when you use the BD-LIVE service.

In the Home screen, select Settings,

and then press the v button.

You can turn on the power quickly by

decreasing the boot time.

Enables you to manage the downloaded

contents you accessed through a Blu-ray disc

that supports the BD-LIVE service and stored

on a flash drive.

buttons. To change the PIN, use the Change

PIN function (page 15). Each time you access

the Security Settings hereafter, you must

enter that four digit PIN. If you don’t change

the PIN, continue using the default PIN.

The dLNA Function

DLNA lets you play music, video, and photo

files located in your PC or NAS on the player.

NOTES

✎

If this function is set to On, Standby power

You can check the device’s information

including the storage size, delete the BD data,

or change the Flash memory device.

To use DLNA with your player, you must

connect the player to your network.

(See pages 12~13).

consumption will be increased.

Bd parental Rating

Anynet+ (HdmI-CEC)

To use DLNA with your PC, you must install

DLNA software on your PC.

NOTES

✎

Prevents playback of Blu-ray Discs with

specific age ratings unless the 4 digit PIN is

Anynet+ is a convenient function that offers

linked operations with other Samsung players

that have the Anynet+ feature.

In the external memory mode, disc playback

may be stopped if you disconnect the USB

device in the middle of playback.

If you have NAS, you can use DLNA without

any additional software.

^edⁿV^ted^redp^.arental Rating

To operate this function, connect this player to

an Anynet+ Samsung TV with an HDMI cable.

With Anynet+ on, you can operate this player

using a Samsung TV remote control and start

disc playback simply by pressing the pLAy

Your player supports the FAT16, FAT32, and

NTFS file systems. We recommend you use

USB devices that support USB 2.0 protocol

with 4 MB/sec or faster read/write speed.

To download dLNA software

This function works in conjunction with DVDs

that have been assigned an age rating or

numeric rating that indicates the maturity level

of the content. These numbers help you control

the types of DVDs that your family can watch.

Go to Samsung.com

Click Support, enter your player’s

product number in the field that

appears, and then click Product.

(

) button on the TV’s remote control.

The Resume Play function may not work after

For more information, please see the TV user

you format the storage device.

manual.

✎

Select the rating level you want to set.

For example, if you select Level 6, discs rated

above 6 - Level 7 and 8 - will not play.

The total memory available to BD Data

Management may differ, depending on the

conditions.

NOTES

On the next screen, click Get downloads

under Downloads.

This function is not available if the HDMI cable

does not support CEC.

Click Software on the next page.

A larger number indicates more mature content.

If your Samsung TV has an Anynet+ logo, then

it supports the Anynet+ function.

When the DVD Parental Rating function is on,

you must enter the 4 digit PIN to play discs

with restricted rating levels.

Click the icon in the DLNA line under File

Language Settings

to start the download.

Depending on your TV, certain HDMI output

resolutions may not work.

For instructions explaining how to play content

located on your PC, see page 17.

You can select the language you prefer for the

Home menu, disc menu, audio, and subtitles.

Change pIN

Please refer to the user manual of your TV.

If you have Anynet+ turned on, when you

turn off the product, disconnect, and then

reconnect the power cable, the product turns

on automatically to re-establish the Anynet+

connection. After about 15 seconds, it turns off

again automatically.

NOTES

✎

Change the 4-digit password used to access

security functions.

System Settings

The selected language will only appear if it is

supported on the disc.

To change the PIN, follow these steps:

Initial Settings

Select Change PIN, and then press the

Security Settings

When you access this function for the first

time, the PIN screen appears. Enter the

default PIN - 0000 - using the number

button. The Enter old PIN screen

By using the Initial Settings function, you can

set the language, Network Settings, etc.

For more information about the Initial Settings

function, refer to the Initial Settings section of

Some Samsung TVs, when connected to this

product using the Anynet+ function will, when

you turn them on, display a warning popup

message saying no connection has been

found. Never-the-less, the Anynet+ connection

appears.

Enter the old PIN. If you never changed

the PIN, enter the default PIN: 0000.

The Enter new PIN screen appears.

^tQ^hiu^si^uc^sk^erS^mt^aaⁿr^ut^{al (page 9).}

Enter the new PIN in the Enter new PIN

Bd dⁱa^st^pa^ropm^erlya^en^sta^abg^lise^hem^{d a}eⁿn^dt^{available to use.}

fields.

Re-enter the new PIN in the Confirm

new PIN fields. The "PIN is changed

successfully." message appears.

Press the

button.

automatically before restarting.

(Never turn the player on or off manually

during an upgrade.)

The update is complete when the player turns

off after restarting. Press the POWER button to

turn on the updated player for your use.

NOTES

✎

No disc should be in the product when you

If you forget your password

upgrade the software using the USB Host jack.

Never turn the player off or on manually during

the update process.

The update progress popup will appear.

When the update is completed, the

player will turn off automatically.

When the software upgrade is done, check the

Remove any discs.

software details in the software Upgrade menu.

Samsung Electronics takes no legal

Press and hold the @ button on the

front panel for 5 seconds or more.

All settings will revert to the factory settings.

Do not turn off the player during the software

upgrade. It may cause the player to malfunction.

responsibility for player malfunction caused by

an unstable Internet connection or consumer

negligence during software upgrade.

Press the pOWER button to turn on the

player.

Software upgrades using the USB Host jack

must be performed with a USB flash memory

stick only.

NOTES

✎

NOTES

✎

When the factory default settings are restored,

all the user stored BD data will be deleted.

Contact Samsung

The Update is complete when the player turns

off after restarting. Press the POWER button to

turn on the updated player for your use.

Provides contact information for assistance

Auto Upgrade Notification

^wTe^ithrm^yos^uro^pf^laS^yee^r.rvice Agreement

General Settings

Never turn the player off or back on manually

If you have connected the player to your

network, and then set Auto Upgrade

Notification on, the player automatically

notifies you when a new software version is

available for the player.

during the update process.

Time Zone

Samsung Electronics takes no legal

Lets you view the general disclaimer regarding

third party contents and services.

responsibility for player malfunction caused by

an unstable Internet connection or consumer

negligence during a software upgrade.

Lets you specify the time zone that is

applicable to your area.

To set Auto Upgrade Notification on, follow

Reset

these steps:

Support Settings

By USB

Returns all settings to their factory defaults

except for the network settings.

Select Auto Upgrade Notification, and

then press the

button.

To upgrade by USB, follow these steps:

Software Upgrade

Use the ▲▼ buttons to select On, and

Visit www.samsung.com/bluraysupport.

then press the

button.

The Software Upgrade menu allows you to

upgrade the player’s software for performance

improvements or additional services.

Download the latest USB software

If there is a new software version available,

upgrade zip archive to your computer.

the player notifies you with a popup message.

Unzip the zip archive to your computer.

You should have a single RUF file with

the same name as the zip file.

To upgrade the firmware, select yes

in the Pop-up. The player turns off

automatically, then restarts, and begins

the download. (Never turn the player on

or off manually during an upgrade.)

By Online

To upgrade By Online, follow these steps:

Copy the RUF file to a USB flash drive.

Select By Online, and then press the

Make sure there is no disc in the player,

and then insert the USB flash drive into

the USB port of the player.

button. The Connecting to Server

The update progress popup appears.

message appears.

When the update is complete, the player

turns off again automatically.

A popup message will appear if an

In the player’s menu, go to Settings >

update is available.

Press the pOWER button to turn on the

Support > Software Upgrade.

player.

If you select yes, the player will turn off

Select By USB.

NOTES

✎

Use the ◄►▲▼ buttons to select a file

Playing a Disc with User Recorded

Content

to view or play, and then press the

Media Play

button.

NOTES

You can play multimedia files you have

Playing a Commercially Recorded

✎

recorded on Blu-ray, DVD, or CD discs.

Videos

Photos

Music

Settings

Disc

Even though the player will display folders for

all content types, it will only display files of the

Content Type you selected in Step 6 or Step

6-1.

Place a user recorded disc into the

disc tray with the disc’s label facing

up, and then close the tray. The Device

Connected pop-up appears.

Press the

tray.

button to open the disc

No Disc

123

For example, if you selected music, you will

only be able to see music files. You can change

this selection by returning to the Home screen

and following the directions from Step 4.

Place a disc gently into the disc tray

HD Movies

CinemaNow

VUDU

CinemaNow

Pandora

Use the ◄► buttons to select the type

of content you want to view or play -

Videos, Photos, or Music - and then

with the disc's label facing up.

123

Change Device

Safely Remove USB

View Devices

Enter

Press the

button to close the disc

tray. Playback starts automatically.

Press the ◄► buttons to select Videos,

press the

button.

10. Press the RETURN button one or more

times to exit a current screen, exit a

folder, or to return to the Home screen.

Press the ExIT button to return directly

to the Home Screen.

music, or photos, and then press the

NOTES

✎

button. Go to Step 7.

Playing Files on a USB Device

Even though the player will display folders for

all content types, it will only display files of

the Content Type you selected in Step 2. For

example, if you selected music, you will only

be able to see music files. You can change this

selection by returning to the Home screen and

repeating Step 2.

-1

5 . Press the ◄► buttons to select USB,

then press the

button.

You can play multimedia files located on a

USB storage device.

11. The controls and tools you use to

control and play videos, music, and

pictures located on a USB device are

identical to those you use to play videos,

music, and pictures on a disc.

123

Settings

Move to the Home menu.

In Stop mode, connect the USB storage

device to the USB port on the front

panel of the player.

A screen appears listing the contents

of the disc. Depending on how the

contents are arranged, you will see

either folders, individual files, or both.

Go to pages 17~18 for instructions.

The message "Do you want to access

HD Movies

CinemaNow

NOTES

✎

the device?" is displayed.

Netflix

VUDU

CinemaNow

Pandora

You must remove the USB storage device

safely by performing the "Safely Remove USB"

function in order to prevent possible damage

to the USB memory. Press the MENU button to

move to the Home menu, select the YELLOW

123

Home

Enter

Press the ◄► button to select yes, and

If necessary, use the ▲▼◄►buttons to

then press the

button.

-1

6 . Press the ▲▼ buttons to select Videos,

select a folder, and then press the

If you have a disc in the Blu-ray player,

press the REd (A) or BLUE (d) button.

If you do not, go to Step 6.

music or photos, and then press the

button.

Use the ◄►▲▼ buttons to select a file

button.

A screen appears listing the contents

of the device. Depending on how the

contents are arranged, you will see

either folders, individual files, or both.

to view or play, and then press the

If you pressed the REd (A) button, go to

Step 5.

If you insert a disc when playing a USB storage

device, the device mode changes to Blu-ray,

DVD or CD automatically.

button.

If you pressed the BLUE (d) button, go

Press the RETURN button one or more

times to exit a current screen, exit a

folder, or to return to the Home screen.

Press the ExIT button to return directly

to the Home Screen.

-1

to Step 5 .

If necessary, use the ▲▼◄►buttons to

Press the ▲▼ buttons to select USB,

select a folder, and then press the

and then press the

button.

Go to pages 17~18 for instructions

that explain how to control playback of

videos, music, and pictures on a disc.

Press the RETURN button one or more

times to exit a current screen, exit a

folder, or to return to the Home screen.

Press the ExIT button to return directly

to the Home Screen.

Playing Content Located in Your PC

Controlling Music Playback

button

Starts playback.

Stops playback.

To play content located in your PC on your

Blu-ray disc player, you must connect the

Blu-ray player to you network. (See pages

12~13.) and install DLNA Software on your

You can control the playback of music located

on a Blu-ray disc, DVD, CD, USB device, or

Pauses playback.

During playback, press the

^yB^ou^urtt^co^omns^puo^ten^r.the Remote Control

Go to pages 17~18 for instructions

that explain how to control playback of

videos, music, and pictures on a PC.

^PTo^C.play Content From your pC

button.

Fast Motion

Play

Each time you press the

used for music playback

button, the playback speed

will change.

Go to the Home Menu.

Controlling Video Playback

In pause mode, press the

Press the BLUE (d) button on your

button.

You can control the playback of video content

located on a Blu-ray disc, DVD, CD, USB

device, or you computer. Depending on the

media, some of the functions described in this

manual may not be available.

remote (Device).

Slow Motion

Play

Each time you press the

In the Device screen that appears, select

button, the playback speed will

your PC, and then press the

button.

change.

Use the ◄► buttons to select the type

of content you want to view or play -

Videos, Photos, or Music - and then

In pause mode, press the

Step Motion

Play

button.

Buttons on the Remote Control

Each time you press the

press the

button.

used for Video playback

button, a new frame appears.

NOTES

✎

NUMBER buttons (Audio CD (CD-DA) only) :

During Playlist playback, press the desired

track number.

During playback, press the

Even though the player will display folders for

all content types, it will only display files of

the Content Type you selected in Step 4. For

example, if you selected music, you will only

be able to see music files. You can change this

selection by returning to the Home screen and

repeating Step 4.

button.

Skip Motion

Play

Each time you press the

The selected track is played.

button, the disc moves to the

previous or next chapter or file.

Skip : During playback, press the

the playlist.

button to move to the previous or next file of

Using the disc menu, title menu,

popup menu, and title list

A screen appears listing the contents

on your PC. Depending on how the

contents are arranged, you will see

either folders, individual files, or both.

button : Stops a track.

playback related buttons

DISC MENU

During playback, press this button

Fast Play (Audio CD (CD-DA) only)

The player does not play sound in Search,

Slow or Step mode.

button

to start the disc menu function.

During playback, press the

button.

If necessary, use the ▲▼◄►buttons to

TITLE MENU

During playback, press this button

to start the title menu function.

• To return to normal speed playback, press

select a folder, and then press the

button

Each time you press the

button,

the

button.

the playback speed will change.

POPUP MENU

button

During playback, press this button

Use the ◄►▲▼ buttons to select a file

to start the popup menu function.

Pause : Pauses a track.

to view or play, and then press the

button.

button : Plays the currently selected

track.

NOTES

✎

Repeat an Audio Cd (Cd-dA)/

playlist

You can create a playlist with up to 99 tracks

mp3

on Audio CDs (CD-DA).

To move to the Music List, press the

or RETURN button.

If you remove all the tracks from a play list and

During Playlist playback, press the

The Music List screen appears.

then press the

button, the player lists and

TOOLS button.

plays all the tracks on the disc.

1/2 Page

Playlist

1/6

Music

TRACK 001

Tools

TRACK 001

Repeat Mode

Off

TRACK 002

02:38

05:57

02:38

Playing Photo Contents

You can control the playback of photo content

located on a Blu-ray disc, DVD, CD, USB

device, or your computer.

InformTR

002

04:27

TRACK 003

TRACK 004

02:38

Adjust

Move

Return

02:38

TRACK 003

TRACK 004

TRACK 005

TRACK 006

04:07

03:41