SD-927PKC-NEQ
SECO-LARM's "No Touch" Request-To-Exit Sensor uses IR
technology to open a door or activate a device with the
simple wave of a hand. The trigger distance is up to 4".
Since it is no touch, this sensor is ideal for use in
hospitals, clinics, labs, cleanrooms (to reduce the risk of
contamination) or for use in schools, factories, or offices
(anywhere an easy way to exit is required).
Features:
Technical Specifications:
No Touch -- just wave a hand in front of sensor.
Sensing range up to 4" (10cm).
Attractive "ring" illuminator turns from green to red
when the sensor is activated.
SD-927PKC-NEQ
Voltage
12VDC
Current Drain
Relay Type
Response Time
Output Time
Range
40mA @ 12VDC
Form-C dry contact, 3A@12VDC
10mS
Reduce the risk of cross contamination.
Easy and clean operation.
0.5S or as long as unit is triggered
Reliable IR technology senses motion.
Durable stainless-steel plate.
Up to 4" (10cm)
Temperature Range -4o~131oF (-20o~55oC)
Quick-connect screwless terminal block.
SPDT 3A relay output.
Weight
3oz (85g)
1
3
5
Dimensions
4 /2" x 2 / " x 1 /16" (115 x 70 x 33.5mm)
4
Application:
Dimensions:
NO TOUCH
41/2
(115mm)
"
2"
(51mm)
EXIT
23/4
(70mm)
"
11/16"
(27mm)
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
®
1.949.261.2999 (CA & Int’l)
1.800.662.0800
Fax: 1.949.261.7326
Email: info@seco-larm.com Website: www.seco-larm.com
NoTouchSensorc.cdr
16842 Millikan Avenue, Irvine, CA 92606
|