2-Serial/1-Parallel Port PCI Adapter RC303
User Manual
2-Serial/1-Parallel Port PCI Adapter RC303
User Manual
Start Windows 95/98/2000/XP.
The“Update Device driver Wizard” will appear,
informing you that it has found a “PCI I/O Card”.
Click the “Next” button.
Click “Other Location” for Windows 95 or
“Specify a location” for Windows 98 to install
the driver.
Insert the driver CD in CD-ROM drive (D) and
click on the “Browse” button.
Windows 98/95/2000 will automatically locate
the driver in the driver diskette. Click the “OK”
button to continue.
.
Click on the finish button to start copying files
from driver diskette..
2
2-Serial/1-Parallel Port PCI Adapter RC303
User Manual
Windows 98/95/2000 will automatically restart in order to update the hardware configuration.
Once Windows 98/95/2000 has restarted, you can now connect your external devices to the PCI I/O card. To install
the driver for the external devices, please refer to the external device user’s manual.
Windows NT 4.0
z
z
z
z
z
z
z
z
z
z
z
z
Make sure Windows NT 4.0 is properly installed into your system first.
Start Windows NT.
Insert Windows NT 4.0 driver diskette (disk 2) into the floppy drive.
Select “RUN” option in Windows NT.
At the “RUN” option, click on the“Browse” button.
At the Browse for Folder window:
Select “Floppy (A)”
Double click on the winnt folder
Select NetMosXXX drivers.exe
Click on the Open button
Finally, click the“OK” button
Follow the instructions to finish up the driver installation. Your system will automatically restart in
order to complete the driver installation.
Installing DOS Driver
z
z
z
z
Copy “NMDOSIN.EXE” to your hard disk and run “NMDOSIN.EXE”
Update Drivers
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com/ for complete warranty information and future support for your
product.
3
|