REQ313 GR APHIC EQUALIZER
The ROLLS REQ313 graphic equalizer is intended for room equalizing or sound shaping and the approximate fre-
quency response curve can be seen graphically by the settings of the frequency controls. Recording and broadcasting
studios, sound contractors and musicians will appreciate the low noise, straightforward design, and versatile signal
control of the REQ series.
The equalization filters in the REQ313 are constant bandwidth
(constant Q).The bandwidth of each individual filter is narrow
enough to prevent unwarranted interaction between filters, yet
wide enough to produce exactly the type of correction curve
demanded by even the most unusual acoustic surroundings.
FEATURES
• 31 Bands of constant Q equalization
• XLR and 1/4” input and output
• Low cut and High cut filters
• Passive bypass
• 1Year Warranty
SPECIFICATIONS
Equalizer
Bands:
31
Frequency Response:
Accuracy:
20Hz - 20kHz
5% Center Frequency
Range:
+6dB or +12 dB (Switch selectable)
Inputs
Type:
Active Balanced/Unbalanced
XLR, 1/4” TRS
12k Ohms
+22 dB (Balanced),
+15dB (Unbalanced)
Connectors:
Impedance:
Maximum Level
Outputs
Type:
Electronically Balanced
XLR, 1/4” TRS
600 Ohms
+22 dB (Balanced),
+15dB (Unbalanced)
Yes
Connectors:
Impedance:
Maximum Level:
RFI Filters:
Passive Bypass Switches:
Overload LED Threshold:
Low Cut Filter:
Frequency Response:
THD + Noise:
S/N Ratio:
Equivalent Input Noise:
Dimensions:
Yes
3dB below clipping
10 - 250Hz, 12dB/Oct.
20Hz - 20kHz, +0.5dB
0.01% (20Hz - 40kHz)
110dB below Max level (A weighted)
-95dB (20kHz noise bandwidth)
3.5”H x 19”W x 8.5”D
ROLLS CORP.
5968 South 350 West
Salt Lake City, UT 84107
(801) 263-9053 • (801) 263-9068
|