Roland Electronic Keyboard AT 90S User Guide

®ÂØÒňή  
AT-90S  
TurboStart  
Atelier organ  
3. Press a tone button (e.g. Strings, French Horn,  
Choir, etc.) under SYMPHONIC in the UPPER  
section to hear two tones simultaneously.  
It’s a Fact…  
The AT-90S is part of Roland’s Atelier® S-Series  
home organs. Building on the popular R-Series, the  
AT-90S includes:  
Note: To hear only the SYMPHONIC tone, press the  
selected tone button (indicator lit) under ORGAN in  
the UPPER section until its indicator is not lit.  
340 CD-quality GM2/©sounds  
16 drum sets, 1 SFX Set  
256-note polyphony  
56-key velocity-sensitive upper-keyboard, 76-key  
velocity-sensitive lower-keyboard, 25 pedals  
200 preset music styles (16 overwriteable)  
16 programmable registrations  
7-track recorder with built-in metronome  
Rotary Sound, RSS® Reverb, Chorus, Vibrato  
Built-in 3.5” floppy disk drive  
4. Press a tone button (e.g. Piano, A. Guitar, Brass,  
etc.) under ORCHESTRAL in the UPPER  
section to hear three tones simultaneously.  
5. To select a tone on the lower keyboard, repeat  
steps 1–4, substituting the word LOWER for the  
word UPPER.  
Refer to the Owner’s Manual, pp. 34–37 for more  
information.  
Color touch screen with SMF lyric display  
(includes video out)  
Selecting Music Styles  
Intializing—Restoring Factory  
Settings  
Use the following procedure to clear the internal  
memory and reload the factory settings:  
Use the following procedure to select a Music Style  
from internal memory:  
1. Press a rhythm button (e.g. Ballad, Latin,  
Acoustic etc.) in the RHYTHM section (located  
on the left side of the organ.)  
Caution: All USER information will be lost. Be sure to  
2. Touch a MUSIC STYLE on the screen.  
back up any information you wish to keep.  
Note: You will see 8 Music Styles on the screen;  
touch [t] or [u] on the screen to see additional  
Music Styles.  
1. Make sure there is no floppy disk in the drive.  
2. Turn off the power.  
3. While holding down the ONE TOUCH  
PROGRAM button, turn on the power.  
4. Release the ONE TOUCH PROGRAM button  
when the screen reads: “Factory Preset is  
Loaded.”  
3. Press the START/STOP button (located to the  
left of the upper keyboard) to play the MUSIC  
STYLE; press the START/STOP button again to  
silence the organ.  
Refer to the Owner’s Manual, pp. 57–58 for more  
information.  
Refer to the Owner’s Manual, pg. 23 for more  
information.  
Use the following procedure to select a Music Style  
from disk:  
Selecting Tones  
Use the following procedure to select a tone on the  
upper keyboard:  
1. Press the DISK button in the RHYTHM section.  
2. Insert a compatible Music Styles Disk (i.e. MSA,  
MSE, or MSD) into the drive.  
1. Press a tone button (e.g. Full 1, Pipe 1, Theater  
1, etc.) under ORGAN in the UPPER section  
(located to the right of the screen.)  
2. Press the ALTERNATE button under ORGAN in  
the UPPER section to hear a variation of the  
selected tone; press the ALTERNATE button  
again to return to the original tone.)  
3. Touch a MUSIC STYLE on the screen.  
4. Press the START/STOP button (located to the  
left of the upper keyboard) to play the MUSIC  
STYLE; press the START/STOP button again to  
silence the organ.  
Refer to the Owner’s Manual, pp. 70–72 for more  
information.  
TBS166 ©2002 Roland Corporation U.S., 5100 S. Eastern Ave., Los Angeles CA 90040 Faxback # 20199 Page 1  
 
®ÂØÒňή  
AT-90S  
TurboStart  
Atelier organ  
Selecting Harmony Intelligence  
Use the following procedure to select Harmony  
Intelligence:  
1. Press the OTHERS button under HARMONY  
INTELLIGENCE (located to the left of the  
screen) until its indicator is lit.  
2. Touch a HARMONY TYPE on the screen.  
Note: You will see 8 Harmony Types on the screen;  
touch [t] or [u] on the screen to see additional  
Harmony Types.  
3. Press the HARMONY INTELLIGENCE button.  
Refer to the Owner’s Manual, pp. 106–108 for more  
information.  
Transposing  
Use the following procedure to transpose the  
keyboard:  
1. Press the [+] button to raise the key one  
semitone (located to the left of the disk drive.)  
2. Press the [-] button to lower the key one  
semitone.  
3. Press the [+] and [-] buttons simultaneously to  
return to the key of C.  
Refer to the Owner’s Manual, pg. 102 for more  
information.  
TBS166 ©2002 Roland Corporation U.S., 5100 S. Eastern Ave., Los Angeles CA 90040 Faxback # 20199 Page 3  
 

Q Logic TV Video Accessories 59238 02 A User Guide
Radio Shack Cassette Player AM FM Stereo Auto Reverse Cassette Recorder User Guide
RCA Network Router 605 User Guide
RCA Projection Television HD61LPW165 User Guide
Samsung Air Conditioner AS070VE User Guide
Sanitaire Vacuum Cleaner SC6600 User Guide
Sanus Systems Home Theater Screen ELM101 User Guide
Sanus Systems TV Mount VM100 User Guide
Scientific Atlanta CD Player AT8450 User Guide
Sears Home Gym 831159460 User Guide