2 Insert one stand foot into the longer arm on the center crossbar.
DJ Hero™ Stand
Package contents
3 Locate the two holes on the center crossbar. These holes determine
the height of the stand.
4 Align the two holes in the crossbar with the holes in the feet to set
the height, then insert a bolt clip through each of the holes.
Center crossbar
Top supports (2)
Top cradle bars (2)
Higher
Lower
Base bar
Stand feet (2)
Bolt clips (4) Quick Setup Guide
Product features
•
Designed for use with DJ Hero™ turntables for PlayStation®2,
PlayStation®3, Xbox 360®, and Wii™
Made of sturdy, durable material
Adjustable stand provides two height levels
Easy assembly
•
•
•
5 Repeat Steps 1 through 4 to attach the second stand foot.
Setting up the stand
1 Hold the stand feet upright.
Higher level
Lower level
RF-GSL010A
QUICK SETUP GUIDE
|