Renesas Network Card R0E5212L4CFG00 User Guide

R0E5212L4CFG00  
Converter Board for 32-pin 0.8mm pitch LQFP  
User’s Manual  
If the requirements shown in the "CAUTION" sentences are ignored, the  
equipment may cause personal injury or damage to the products.  
CAUTION  
Renesas Tools Homepage http://www.renesas.com/tools  
Rev. 1.00  
Oct. 02, 2007  
(1/4)  
REJ10J1685-0100  
 
5. Connection Procedure (See Figure 3)  
The procedure for connecting the R0E5212L4CFG00 is shown  
below.  
R0E521000EPB00  
or  
R0E 521000CPE00  
R0E5212L4CFG00  
(1) Mount the NQPACK032SA on the user system.  
(2) Attach the YQPACK032SA on the NQPACK032SA.  
(3) Secure the four corners of the YQPACK032SA with the  
YQ-GUIDE's.  
(4)  
(5)  
Be sure to use a  
flathead screwdriver.  
YQ- GUIDE (x4)  
Do not use the screws included with the  
YQPACK032SA for fixing the YQPACK032SA.  
The screwdriver included with the NQPACK032SA is  
used for fixing the HQPACK032SA. Do not use it for  
fixing the YQ-GUIDE’s.  
(3)  
YQPACK032SA  
(2)  
(1)  
NQPACK032SA  
(4) Attach the R0E521000EPB00 or R0E521000CPE00 to the  
R0E5212L4CFG00.  
32-pin 0.8mm pitch  
(PLQP0032GB-A) foot pattern  
(5) Attach the R0E5212L4CFG00 to the YQPACK032SA.  
Figure 3 Connection procedure of the R0E5212L4CFG00  
6. External Dimensions and a Sample Foot Pattern (See Figure 4)  
31.0  
0.5  
R0E5212L4CFG00 REV.A  
MADE IN JAPAN  
0.8  
6.8  
10.0  
Unit: mm  
Figure 4 External dimensions and a sample foot pattern of the R0E5212L4CFG00  
(3/4)  
 
7. Precautions  
CAUTION  
Cautions to Be Taken for This Product:  
z Do not pull or excessively flex the cable. The cable may cause a break.  
z When connecting the YQPACK032SA, be sure to use the included YQ-GUIDE's.  
z Do not use the screws included with the YQPACK032SA to fix it.  
IMPORTANT  
Notes on This Product:  
z We cannot accept any request for repair.  
z For purchasing the NQPACK032SA, YQPACK032SA and HQPACK032SA, contact the following:  
z For inquiries about the product or the contents of this manual, contact your local distributor.  
Renesas Tools Homepagehttp://www.renesas.com/tools  
8. Adding an MCU file  
If you cannot select the MCU file for the R8C/2K and /2L Groups when the emulator debugger is launched, follow as below to add  
the MCU file.  
(1) Download the MCU file installer for the emulator to be used from the following download site.  
- When using with the compact emulator R0E521000CPE00  
MCU file installer name: MCU_Files_install_cpe_R8C_2K-2L.exe  
- When using with the emulation probe R0E521000EPB00  
MCU file installer name: MCU_Files_install_epb_R8C_2K-2L.exe  
(2) Start the downloaded installer to add the MCU file.  
(4/4)  
 

Roberts Radio Cassette Player SRC985 User Guide
Rolls Stereo Amplifier MA2355 User Guide
RTcom Network Card Radio Modems User Guide
Samsung Bluetooth Headset GH68 17668A User Guide
Samsung Dishwasher DMT800 User Guide
Samsung Printer ML 4512ND User Guide
Samsung Speaker System HW F750 User Guide
Sanyo Cell Phone SCP 3100 User Guide
Sears Fitness Equipment 831159231 User Guide
Seiko Watch 7S26 User Guide