Radio Shack Satellite TV System 15 1858 User Guide

(GCVWTGU  
38” Telescoping Antennas - Extend fully and  
rotate for the best VHF and FM reception.  
.KIJVGFꢀ%NQEMꢀ  
UHF Antenna - Rotate up to 160° for best UHF  
reception.  
68ꢁ(/ꢀ#PVGPPC  
Backlight - Press to easily view the time and  
temperature in the dark.  
ꢂꢃꢄꢂꢅꢃꢅ  
F°/C° - Press to switch the temperature between  
Thank you for buying the RadioShack Lighted Clock  
TV/FM Antenna. It is perfect for receiving HD (High  
Definition) signals, and improving your TV or stereo  
receiver’s FM reception. You also can switch between  
the antenna and an external signal, such as cable,  
satellite or a video game. And, the large-digit display lets  
you see the time and temperature at a glance.  
Fahrenheit and Celsius.  
ANT/AUX - Press to switch between the antenna  
and an external signal (such as cable, satellite, or  
video game system).  
AUX IN - Provide the connection for external  
antenna, video game or cable.  
Gold Plated Connector - Ensures best connection  
for external input port.  
2QYGTKPIꢀVJGꢀ#PVGPPC  
$CVVGT[ꢀ2QYGT  
1.Lift the battery cover off the battery compartment on  
the bottom of the antenna  
Battery Cover  
$CUKEꢀ%QPPGEVKQP  
base.  
1.Place the antenna on or near your TV or FM receiver.  
2.Insert two AA alkaline  
batteries (not supplied),  
as indicated by the  
2.If your TV has an F-connector, connect the supplied coaxial cable to the antenna’s TO TV jack and your TV’s ANTENNA IN jack.  
If your TV has a 300-ohm twin-lead connector, attach a 2-way splitter (not supplied) to the TV’s VHF and UHF terminal screws. Then,  
connect the coaxial cable to the splitter’s F-connector and the antenna’s TO TV jack.  
3.Connect a second video source, such as a cable TV or video game, to the antenna’s AUX IN terminal using a 75-ohm coaxial  
cable/connector (not supplied).  
polarity symbols (+ and -)  
marked inside.  
3.Replace the cover.  
Note: Visit your local RadioShack store for additional accessories you may need.  
#%ꢀ2QYGT  
Youcanpower your antenna  
with AC power using a 9V 100mA adapter and a size  
M Adaptaplug (neither supplied).  
1.Attach a size M Adaptaplug to a 9V AC adapter,  
with its tip set to positive (+).  
2.Insert the Adaptaplug into the antenna’s DC 9V  
jack. Then, plug the other end into a standard AC  
outlet.  
Notes:  
• If you need to use the backlight function, we  
recommend using the AC adapter to power the  
antenna.  
• Internal batteries (if installed) automatically disconnect  
when you plug an AC adapter into the antenna.  
• If the LCD display is abnormal, replace the batteries or  
disconnect all power and reconnect after 10 minutes.  
9V DC  
JACK  
AUX IN  
TO TV JACK  
COAXIAL  
CABLE  
 

Radio Shack Surge Protector 61 2402 User Guide
Rotel Stereo Amplifier RB951 User Guide
Royal Appliance Vacuum Cleaner M5036_5037 User Guide
Ryobi Trimmer 700r User Guide
Samsung DVR SVR 1670 User Guide
Samsung Network Card MP 80S User Guide
Scientific Atlanta Network Card DPX100 User Guide
Sears Saw 113298141 User Guide
Seiko Group Printer TM L60 User Guide
Sennheiser Battery Charger L 1032 User Guide