26-442.fm Page 1 Friday, March 5, 1999 4:43 PM
Cat. No. 26-442
OWNER’S MANUAL
Please read before using this equipment.
Dual Wheel Scrolling Trackball
with Programmable Third Button
26-442.fm Page 3 Friday, March 5, 1999 4:43 PM
CONTENTS
Installation ............................................................................................................... 4
Hardware ............................................................................................................ 4
Software ............................................................................................................. 4
Installing in Windows 95/98 ......................................................................... 4
Installing in Windows 3.1 ............................................................................. 4
Installing in DOS .......................................................................................... 5
Operating in Windows ............................................................................................ 6
Buttons Control Panel ........................................................................................ 6
Setting the Right- or Left-Handed Configuration .......................................... 6
Setting the Double Click Speed ................................................................... 6
Pointer Control Panel ......................................................................................... 7
Motion Control Panel .......................................................................................... 7
Setting the Pointer Speed ............................................................................ 8
Setting the Pointer Trail ............................................................................... 8
Wheel Control Panel .......................................................................................... 8
Setting Wheel Properties ............................................................................. 8
Wheel Mode .......................................................................................... 8
Vertical Wheel ....................................................................................... 8
Setting the Scrolling Speed ................................................................... 9
Horizontal Wheel ................................................................................... 9
Scrolling ................................................................................................. 9
Third Button Control Panel ................................................................................. 9
Zoom ............................................................................................................ 9
Auto Scroll ................................................................................................. 10
Others ........................................................................................................ 11
Using the Third Button ............................................................................... 11
General Control Panel ...................................................................................... 11
Checking the Driver Version ...................................................................... 11
Changing the Driver Version ...................................................................... 12
Operating in DOS .................................................................................................. 13
Care and Maintenance .......................................................................................... 14
Cleaning the Trackball ...................................................................................... 15
The FCC Wants You to Know ............................................................................... 16
Declaration of Conformity ................................................................................. 16
3
26-442.fm Page 4 Friday, March 5, 1999 4:43 PM
INSTALLATION
ple, if the software setup disk is in
drive A, type a:\setup.)
HARDWARE
Caution: Always turn off your computer
before connecting or disconnecting the
Dual Wheel Scroll Trackball Mouse, oth-
erwise you could damage your comput-
er or its PS/2 port.
4. Click OK.
5. Choose the PS/2 button in the Setup
window.
6. Click Next.
7. Select the directory where you want
to install the software.
Disconnect any mouse
you already have con-
nected to the PS/2 port,
then plug the Dual
Wheel Scroll Trackball
Mouse’s 6-pin mini-DIN
plug into the PS/2 mouse
port.
Note: The default is set for the C:\
drive. To choose another drive, click
Browse and find the desired direc-
tory.
8. Click Next to complete installation of
the mouse’s driver.
Note: The Dual Wheel
Scroll Trackball Mouse
only works with a PS/2
mouse port. Do not use
the mouse with a serial
port adapter.
9. Restart your computer to complete
the software installation.
Installing in Windows 3.1
1. Insert the provided setup disk into
your computer’s floppy disk drive.
SOFTWARE
2. Click File, then click Run.
3. In the Run dialog box, type
<drive>:\setup. (For exam-
ple, if the Dual Wheel Mouse setup
disk is in drive A, type a:\setup.)
Caution: Before installing the 4D Scroll-
Ware, be sure to remove all other
mouse drivers and quit all applications.
4. Click on the disk drive where you
want to install the software, then
click Next to complete the software
installation.
Installing in Windows 95/98
1. Insert the provided setup disk into
your computer’s floppy disk drive.
2. Click on Start on the task bar, then
click Run.
3. In the Run dialog box, type
<drive>:\setup. (For exam-
4
26-442.fm Page 5 Friday, March 5, 1999 4:43 PM
6. Move the cursor to a piano key to
test the mouse’s movement and but-
tons.
Installing in DOS
Note: To ensure a successful DOS in-
stallation, boot up to DOS.
If Windows 3.1 loads automatically at
boot up, exit Windows, then proceed
with the mouse’s software installation.
If Windows 95/98 loads automatically at
boot up, select Start from the task bar,
choose Shut Down, and then select Re-
start the computer in MS-DOS mode?
Note: Only the cursor function oper-
ates in DOS.
1. Insert the provided setup disk into
your computer’s floppy disk drive.
7. After testing the mouse, click Quit or
press Q on your keyboard. A dialog
line appears, Do you want to
modify Autoexec.bat? Y/
N?
2. At
the
DOS
prompt,
type
<drive>:\dos\install. (For
example, if the Dual Wheel Mouse
setup disk is in drive A, type
a:\dos\install.)
8. Type Y to edit your computer’s
Autoexec.bat file to include the com-
mand c:\mouse\mouse to load
the mouse driver each time you turn
on or restart your computer.
3. Press Enter. A dialog box appears.
Or, type N if you do not want to mod-
ify the Autoexec.bat file.
4. In the dialog box, type A:\DOS
after SOURCE:.
5. Press Enter twice more to begin the
mouse driver installation. The
mouse test screen appears.
5
26-442.fm Page 6 Friday, March 5, 1999 4:43 PM
OPERATING IN WINDOWS
To launch the mouse’s 4D ScrollWare in
Setting the Right- or Left-
Handed Configuration
Windows 95/98, click on
, in the sys-
tem tray at the bottom right corner of the
computer screen. The Mouse Properties
window opens and displays the tabs for
six program control panels.
To launch the mouse’s driver software in
Windows 3.1, click Dual Wheel Mouse
V5.21. The Dual Wheel Mouse V5.21
window opens and displays the tabs for
five program control panels.
Notes:
• The window always opens to the
Buttons control panel, but you can
select any other panel by clicking on
its tab.
The mouse’s default is for right-handed
users. To change the mouse configura-
tion to left-handed use, click on Left-
handed in the Button configuration dialog
box. The right and left buttons then
switch functions.
• After you select all the functions you
want in each control panel, click OK
at the bottom of the Mouse Proper-
ties window to confirm the settings.
To change back to a right-handed con-
figuration, click on Right-handed.
BUTTONS CONTROL
PANEL
Setting the Double Click Speed
You can adjust how the computer re-
sponds to the speed of your mouse’s
double clicks. To increase or decrease
the double-click speed, click on the
speed control bar and drag it toward
Slow or toward Fast.
To adjust the right-handed or left-hand-
ed mouse button configuration and the
double-click speed, click on Buttons.
The Mouse Properties window displays
with the Buttons control panel on top.
To test the setting, click on the box in
the Test area.
6
26-442.fm Page 7 Friday, March 5, 1999 4:43 PM
the various icons that can be used. Click
Open to select the icon. Then click Save
As, followed by OK to set the cursor
shape.
POINTER CONTROL
PANEL
To change the pointer's appearance,
click on the Pointer tab.
In Windows 3.1, you can change the
size and shade of your on-screen point-
er.
Under Pointer Size, click on the button
for the size you want. Under Pointer Col-
or, click on the white pointer button, the
black pointer button, or the gray pointer
button to select the shade you want.
Then click OK to set the pointer image.
MOTION CONTROL
PANEL
You can adjust how fast or slow the
pointer appears to travel across the
screen as you move it, and how long or
short of a trail it creates.
To adjust the pointer speed and trail,
click on the Motion tab.
In Windows 95/98, you can choose how
you want your on-screen pointer to ap-
pear in different situations.
Note: The Pointers Control Panel in Win-
dows 95/98 is an advanced function re-
quiring the installation of programs (not
included) that include pointer image op-
tions.
Double-click on the pointer image you
want to change from the Scheme list. A
Browse dialog box appears displaying
7
26-442.fm Page 8 Friday, March 5, 1999 4:43 PM
Setting the Pointer Speed
Click on the Pointer Speed bar and drag
it toward Slow or Fast, as desired.
Setting the Pointer Trail
In Windows 95/98, click on the Pointer
Trail button and slide it toward Long or
toward Short.
In Windows 3.1, click Show trails and
slide the control toward Long or Short.
To disable this function, click Swap Verti-
cal and Horizontal Wheel again.
Note: To operate Show trails in Win-
dows 3.1, you must first (if necessary)
set the display mode to VGA.
Wheel Mode
In Windows 95/98, to have all the
advantages of MS-IntelliMouse, plus the
ability to scroll vertically/horizontally in
programs, click on Enhanced Dual Wheel
function mode.
WHEEL CONTROL PANEL
You can use the vertical and horizontal
wheels to move the cursor around in
word processing and graphics applica-
tions without using your wrist or arm—
just move the wheels up or down, left or
right.
To use only the MS IntelliMouse vertical
wheel functions, click on MS-IntelliMouse
Compatible mode.
Vertical Wheel
To reverse the vertical scroll direction,
click on Reverse vertical scroll direction.
Setting Wheel Properties
For more versatility, you can change the
wheels’ properties to fit your needs.
In Windows 95/98, to disable the vertical
wheel’s scrolling function, click on Dis-
able Scrolling Function.
To adjust the settings for the dual scroll
wheels, click on the Wheel tab.
To swap the functions of the horizontal
and vertical wheels, click on Swap Verti-
cal and Horizontal Wheel.
8
26-442.fm Page 9 Friday, March 5, 1999 4:43 PM
To scroll up, rotate the vertical wheel up-
ward. To scroll down, rotate the vertical
wheel downward.
Setting the Scrolling Speed
To set the vertical scrolling speed, click
Scroll, then
or
to increase or de-
crease the number of lines for each
scroll.
To scroll left, rotate the horizontal wheel
upward. To scroll right, rotate the hori-
zontal wheel downward.
To scroll vertically exactly one page at a
time when you move the vertical wheel,
click on Scroll one page per scroll unit.
THIRD BUTTON CONTROL
PANEL
Horizontal Wheel
To reverse the horizontal scroll direc-
tion, click on Reverse horizontal scroll di-
rection.
To use the third button on the mouse to
zoom, use auto scroll, or use other func-
tions, click on the Third Button tab.
In Windows 95/98, to disable the hori-
zontal wheel’s scrolling function, click on
Disable Scrolling Function.
Scrolling
Many applications use a scroll function
to move through menus and text. The
vertical and horizontal wheels make
scrolling easier on your hand and wrist
by letting you move the pointer or cursor
with just your finger tips.
Horizontal
Wheel
Zoom
To activate the zoom function, click
Zoom, then Apply.
Vertical
Wheel
Click Settings, then click the third button
on the mouse. A magnified zoom box re-
places the cursor. You can move the
small area of magnification anywhere on
the screen to view portions of text or
graphics.
9
26-442.fm Page 10 Friday, March 5, 1999 4:43 PM
You can increase the zoom box propor-
tions by increasing the values in the
Width and Height scroll bars.
Auto Scroll
To have the third button activate the
auto scroll function, click on Auto Scroll.
The auto scroll direction icon appears.
Place the cursor on the area you want to
zoom, then press the third button.
When using Auto Scroll with an applica-
tion that features a scroll bar, the auto
scroll icon ( ) indicates the direction
the document or image is scrolling.
When you use your mouse, the icon au-
tomatically changes appearance to indi-
cate the direction the cursor is moving.
Third
Button
Note: The farther you move the mouse
without a pause, the faster the scrolling
speed.
To use the auto scroll function with Of-
fice 97 or Internet Explorer 3X/4X, click
Others and select System Default in the
drop-down menu.
To stretch the image vertically, rotate
the vertical wheel upward or downward.
The auto scroll icon appears in the
scrollbar (in MS-Word 97, for example)
or in the cell area (in Excel 97, for exam-
ple).
To stretch the image horizontally, rotate
the horizontal wheel upward or down-
ward.
Note: For more details, check Office 97
or Internet Explorer 3/4.0 on-line help,
and search for the word “IntelliMouse.”
To stop using zoom, click the left or right
mouse button.
To cancel Auto Scroll, click any mouse
button.
In Windows 95/98, to magnify or de-
magnify text or a graphic in a document,
place the cursor in an application that is
Microsoft Office 97 compatible. Then
hold down Ctrl on the keyboard, and ro-
tate the vertical wheel upward or down-
ward to zoom in or out.
10
26-442.fm Page 11 Friday, March 5, 1999 4:43 PM
Caution: Unless you are very clear
about which version mouse driver you
are using, we do not recommend that
you change your mouse driver. If you
select the wrong driver version, the
mouse cursor will not move.
Others
If you want to use the third button for
system functions or as a shortcut for a
command, you can assign a function
from the Others menu.
To select a function, click on Others.
Then select the function from the drop
down menu.
Checking the Driver Version
If the mouse does not appear to be op-
erating properly with certain software,
check that software’s user’s manual to
find the recommended mouse driver
version, then check to see which version
you are currently using.
Using the Third Button
To perform the function you have set in
the third button panel, press the third
button (on the right side of the mouse).
To check which mouse driver version
you are using:
To quit the third button function, press
the left or right mouse button.
In Windows 95/98, move your cursor to
the mouse icon
at the lower right of
the window. After 2 seconds, the mouse
version displays.
GENERAL CONTROL
PANEL
In Windows 3.1, check the Program
Manager list of all software, which
should include Dual Wheel Mouse
V5.21.
We do not anticipate that you will have
any problems with your Dual Wheel
Scrolling Trackball; however, if the
mouse or cursor stop operating proper-
ly, try replacing the mouse driver as de-
scribed in this section. If that does not
work, take the mouse to your local Ra-
dioShack store for assistance.
In DOS, type mouse\mouse at the C:\
prompt. The connected mouse port and
the mouse version are displayed.
11
26-442.fm Page 12 Friday, March 5, 1999 4:43 PM
7. The window shows the location of
Changing the Driver Version
the driver. Click Next.
To change the mouse version:
8. Insert the supplied setup disk, then
In Windows 95, click on the General tab
in the Mouse Properties window, then
click Change. A drop-down menu ap-
pears. Select the compatible mouse
driver version for Windows 95.
click OK.
9. In the Copying Files . . . dialog box,
under Copy files from:, type
A:\win9598, then click OK.
10. In the Update Device Driver Wizard
dialog box, click Finish.
11. In the PS/2 Wheel Mouse V5.21
Properties dialog box, click Close.
The correct mouse version is copied
to the Windows 98 system.
12. Close the System Properties win-
dows and other windows opened
during this process.
In Windows 98:
1. From the Start button on the task
bar, go to Settings and select Con-
trol Panel, then System Properties.
2. Click Device Manager.
3. Double click Mouse. PS2 Wheel
MouseV5.21appears.
4. Double click PS2 Wheel Mouse
V5.21. Select Driver then Update
Driver, then click Next.
5. Choose Display a list of all the driv-
ers in a specific location in order to
select the driver you want, then click
Next.
6. Click Show compatible hardware,
then Next.
12
26-442.fm Page 13 Friday, March 5, 1999 4:43 PM
OPERATING IN DOS
Once you install the Dual Wheel Scroll
Trackball Mouse and the mouse’s driver
software, you can use this mouse in the
DOS environment like you would any
other mouse.
Note: Your mouse’s 4D ScrollWare driv-
er works only in a Windows environ-
ment, not in DOS. Only the cursor
movement function works in DOS.
13
26-442.fm Page 14 Friday, March 5, 1999 4:43 PM
CARE AND MAINTENANCE
Your RadioShack Dual Wheel Scroll Trackball Mouse is an example of superior de-
sign and craftsmanship. The following suggestions will help you care for your mouse
so you can enjoy it for years.
Keep the mouse dry. If it gets wet, wipe it dry immediately. Liquids might
contain minerals that can corrode the electronic circuits.
Use and store the mouse only in normal temperature environments.
Temperature extremes can shorten the life of electronic devices, and
distort or melt plastic parts.
Keep the mouse away from dust and dirt, which can cause premature
wear of parts.
Handle the mouse gently and carefully. Dropping it can damage circuit
boards and cases and can cause the mouse to work improperly.
Wipe the mouse with a damp cloth occasionally to keep it looking new.
Do not use harsh chemicals, cleaning solvents, or strong detergents to
clean the mouse.
Modifying or tampering with the mouse’s internal components can cause a malfunc-
tion and might invalidate its warranty. If your mouse is not performing as it should,
take it to your local RadioShack store for assistance.
14
26-442.fm Page 15 Friday, March 5, 1999 4:43 PM
5. Blow gently into the ball housing to
remove any dust or lint that might
have collected there.
CLEANING THE
TRACKBALL
The mouse might pick up some dust or
lint after prolonged use. If the cursor is
not moving smoothly on the screen, fol-
low these steps to clean the trackball
and its housing.
6. Replace the trackball.
7. Align the tabs on the cap with the
holes on the ball housing, then turn
the cap clockwise to secure it.
1. Shut down and turn off your com-
puter.
2. Insert a pointed object (such as a
straightened paper clip) into the dot
on the ball cap and turn the cap
1
counterclockwise about /4 inch to
detach it.
3. Remove the trackball, as shown.
4. Use a soft dry cloth to wipe the ball.
Note: Never use cleaning fluid, sol-
vents, a tissue, or anything that
might leave lint.
15
26-442.fm Page 16 Friday, March 5, 1999 4:43 PM
THE FCC WANTS YOU TO KNOW
This equipment has been tested and
DECLARATION OF
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are
designed to provide reasonable protec-
tion against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed
and used in accordance with the instruc-
tions, may cause harmful interference to
radio communications.
CONFORMITY
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference, and
(2) this device must accept any interfer-
ence received, including interference
that may cause undesired operation.
Product:
Model:
Trackball Mouse
26-442
However, there is no guarantee that in-
terference will not occur in a particular
installation. If this equipment does
cause harmful interference to radio or
television reception, which can be deter-
mined by turning the equipment off and
on, the user is encouraged to try to cor-
rect the interference by one or more of
the following measures:
Responsible Party:
RadioShack
100 Throckmorton
Fort Worth, TX 76102
Phone:
817-415-3200
• Reorient or relocate the receiving
antenna.
• Increase the separation between
the equipment and receiver.
• Connect the equipment into an out-
let on a circuit different from that to
which the receiver is connected.
• Consult your local RadioShack store
or an experienced radio/TV techni-
cian for help.
Changes or modifications not expressly
approved by RadioShack may cause in-
terference and void the user’s authority
to operate the equipment.
16
26-442.fm Page 17 Friday, March 5, 1999 4:43 PM
NOTES
17
26-442.fm Page 18 Friday, March 5, 1999 4:43 PM
18
26-442.fm Page 19 Friday, March 5, 1999 4:43 PM
19
26-442.fm Page 20 Friday, March 5, 1999 4:43 PM
Limited Ninety-Day Warranty
This product is warranted by RadioShack against manufacturing defects in material and workman-
ship under normal use for ninety (90) days from the date of purchase from RadioShack company-
owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED
HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES,
INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES
CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABIL-
ITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RE-
SPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE
OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WAR-
RANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVE-
NIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN AD-
VISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow the limitations on how long an implied warranty lasts or the exclusion of in-
cidental or consequential damages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the RadioShack
sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, un-
less otherwise provided by law: (a) correct the defect by product repair without charge for parts and
labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase
price. All replaced parts and products, and products on which a refund is made, become the prop-
erty of RadioShack. New or reconditioned parts and products may be used in the performance of
warranty service. Repaired or replaced parts and products are warranted for the remainder of the
original warranty period. You will be charged for repair or replacement of the product made after the
expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse,
accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or
maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs
other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as
fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs
of product removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
RadioShack Customer Relations, Dept. W, 100 Throckmorton St., Suite 600, Fort Worth, TX 76102
We Service What We Sell
3/97
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
03A99
Printed in Hong Kong
|