27600
WALL MOUNT INSTALLATION
INTRODUCTION
MUTE
STORING A PAUSE IN MEMORY
TROUBLESHOOTING GUIDE
LIMITED WARRANTY
ACCESSORY ORDER FORM
40-Channel 2.4GHz
CordlessTelephone
User’s Guide
Because it is necessary to charge the handset for
12 hours prior to connecting the phone for use the
first time, it is better to leave the unit on a flat
surface during initial charge before attempting to
hang it on the wall.
Use the MUTE button to interrupt a phone conversation to talk privately with someone
else in the room.
Use the RE/PA button to insert a pause when a delay is needed in the dialing sequence
(for example, when you must dial a 9 to get an outside line or when you must enter
codes to access your bank’s information line). Each pause counts toward the 16-digit
limit.
Your Cordless Telephone is designed to give you flexibility in use and high quality
performance. To get the most from your new cordless telephone, we suggest that you
take a few minutes right now to read through this instruction manual.
What your warranty covers:
7
In case of difficulty, please check the following Troubleshooting Guide before seeking
service.
CATALOG NUMBER
PRICE*
DESCRIPTION
QUANTITY TOTAL
8
•
Defects in materials or workmanship.
White
5-2514
5-2518
Black
9
1. Press MUTE to activate mute feature (the BAT LOW/MUTE indicator blinks).
2. Press MUTE again to turn it off.
For how long after your purchase:
AC power supply
Belt Clip
5-2501
5-2519
$19.95
$10.85
$21.35
Problem
Solution
•
One year, from date of purchase.
IMPORTANT: Because cordless phones operate on electricity, you should have at least one
phone in your home that is not cordless, in case the power in your home goes out.
If you need to dial 9 to get an outside line and want to store a number in memory
without having to dial 9 each time, you would:
(The warranty period for rental units begins with the first rental or 45 days
from date of shipment to the rental firm, whichever comes first.)
What we will do:
No dial tone
• Check installation:
1. Make sure the mounting bracket is securely
fastened.
Replacement battery
5-2505
— Is the base power cord connected to a
working outlet?
5
4
TONE/PULSE DIALING
This adjustment allows you to select tone (touch-tone) or pulse (rotary) mode dialing.
The phone is automatically set for touch-tone use.
1. Make sure the phone is OFF.
BEFORE YOU BEGIN
— Is CHARGE/IN USE indicator on?
— Is the telephone line cord connected to
the base unit and the wall jack?
2. Set the RINGER switch to ON.
3. Place the handset in the base.
•
Provide you with a new or, at our option, a refurbished unit.The exchange unit
is under warranty for the remainder of the original product’s warranty period.
2. Press MEM.
To order, call 1-800-338-0376 (for accessories only) or complete this order form.
6
3. Press 9.
How you get service:
4. Plug the power supply into the power jack on the back of the
base and the other end into an AC outlet. The CHARGE/IN
USE indicator comes on, indicating the battery is charging.
• Disconnect the base from the wall jack
and connect another phone to the same
jack. If there is no dial tone in the second
phone, the problem might be your wiring
or local service.
• Is the handset out of the base unit’s
range? Move closer to the base unit.
• Make sure the battery is properly charged
(12 hours).
• Is the battery pack installed correctly?
• If the phone still does not work, discon-
nect the power cord and remove the
battery pack.Then reconnect the power
cord and reinstall the battery pack. Place
handset in the base for 10 seconds to
allow it to reinitialize.
PARTS CHECKLIST
Make sure your package includes the items shown here.
TONE
4. Press RE/PA.
For credit card purchases
•
Properly pack your unit. Include any cables, etc., which were originally
provided with the product. We recommend using the original carton and
packing materials.
1. Make sure the phone is OFF.
5. Dial the phone number you want to store in memory.
6. Press MEM.
Your complete charge card number, its expiration date and your signature
are necessary to process all charge card orders.
2. Press and hold the CHAN button for 2 seconds until the phone beeps.
3. Press TONE*.
Allow the phone to charge for 12 hours before using the first
time. If you don't charge the phone properly when you first
set up the phone, perfomance of the battery will be
compromised.
•
”Proof of purchase in the form of a bill of sale or receipted invoice which is
evidence that the product is within the warranty period, must be presented to
obtain warranty service.” For rental firms, proof of first rental is also required.
Also print your name and address and a description of the defect. Send via
standard UPS or its equivalent to:
T
ALK
CHAN
IN USE BA
MUTE
T
L
O
W
7. Press any number key (0-9) to store the phone number in that memory location.
Copy your complete account number from your VISA card.
RE/P
A
FLASH
MUTE
3
I
ABC
JKL
DEF
3
1
4
2
5
8
0
PAGE
GHI
MNO
6
Telephone line cord
PQRS
TUV
WXYZ
9
PULSE
7
CHARGE/
IN USE
T
ONE
OPER
TIP: If you need a longer pause, press RE/PA button more times.
#
*
PAGE
OFF
•
•
ON
T
ALK
CHAN
MUTE
V
OL
MEM
IN
U
S
E
B
M
A
U
T
T
L
E
O
W
1. Make sure the phone is OFF.
5. Remove the mounting bracket. Rotate it so that the bottom of
the phone is flat. Reattach the mounting bracket by inserting
the tabs into the slots on the top of the unit first, and then
snapping the bottom tabs into place.
RINGER
RE/P
A
FLASH
My card expires:
ABC
DEF
3
1
4
2
5
8
GHI
JKL
MNO
6
2. Press and hold the CHAN button for 2 seconds until the phone beeps.
3. Press #.
ATLINKS USA, Inc.
PQRS
TUV
WXYZ
9
7
T
ONE
OPER
0
#
DIALING A STORED NUMBER
1. Make sure the phone is ON by pressing the TALK button.
*
c/oThomson multimedia Inc.
11721 B Alameda Ave.
Socorro,Texas 79927
OFF
•
•
ON
VOL
MEM
RINGER
Copy your complete account number from your
Master Card or Discover.
AC power
supply
Mounting
bracket
Belt clip
6. Plug the telephone line cord into the TEL LINE jack on the back of the base and into
a modular phone jack. Then stuff the excess line cord into the mounting bracket.
2. Press MEM.
TEMPORARY TONE
This feature enables pulse (rotary) service phone users to access touch-tone services
offered by banks, credit card companies, etc., by pressing the TONE button to
temporarily make the phone touch-tone compatible. To get information about your bank
account, for example, you would:
Base
Handset
•
•
Pay any charges billed to you by the Exchange Center for service not covered by the warranty.
3. Press the number (0-9) for the desired memory location. The number dials
automatically.
Insure your shipment for loss or damage. Atlinks accepts no liability in case of
damage or loss.
7. Slip the mounting holes over the wall plate posts and slide the unit down firmly into
place. (Wall plate not included.)
MODULAR JACK REQUIREMENTS
Copy the number above your name on
the Master Card.
•
A new or refurbished unit will be shipped to you freight prepaid.
Dial tone is OK, but
can’t dial out
• Make sure the tone/pulse setting is
programmed correctly.
You need an RJ11 type modular jack, which is the most common type of phone
jack and might look like the one pictured here. If you don’t have a modular
jack, call your local phone company to find out how to get one installed.
8. Remove the handset hook; turn it upside down, and put it back in the slot. You need
to do this so the handset doesn’t fall out of the base.
IMPORTANT: If you make test calls to emergency numbers stored in memory, remain
on the line and briefly explain the reason for the call to the dispatcher. Also, it’s a good
idea to make these calls in off-peak hours, such as early morning or late evening.
What your warranty does not cover:
•
Customer instruction. (Your Owner’s Manual provides information regarding
operating instructions and user controls. Any additional information, should be
obtained from your dealer.)
1. Press the TALK button.
9. Raise the base antenna.
Handset does not ring
• Make sure the RINGER switch on the
handset is turned to ON.
2. Call the bank’s information line.
DIGITAL SECURITY SYSTEM
My card expires:
NOTE: The phone automatically defaults to touch-tone dialing. To change to pulse
(rotary) dialing, see “Tone/Pulse Dialing.” If you don’t know which type of service you
have, check with the phone company.
3. Press the TONE button after your call is answered.
4. Follow the voice instructions to complete your transaction.
5. Hang up when finished. The phone returns to pulse (rotary) service.
• You may have too many extension phones
on your line.Try unplugging some
phones.
BELT CLIP OPERATION
•
•
•
•
•
•
Installation and setup service adjustments.
Batteries.
Damage from misuse or neglect.
Products which have been modified or incorporated into other products.
Products purchased or serviced outside the USA.
Acts of nature, such as but not limited to lightning damage.
Your cordless phone uses a digital security system to provide protection against false
ringing, unauthorized access, and charges to your phone line.
When you place the handset in the base, the unit verifies its security code. After a
power outage or battery replacement, you should place the handset in the base for
about 20 seconds to reset the code.
• See solutions for “No dial tone.”
CONNECTING THE
BELT CLIP
There are two slots, one on each side of
the handset.
CAUTION: Use only the ATLINKS USA 5-2501(black) or 5-2514( white) power
supply that came with this unit. Using other adapters may damage the unit.
Cannot hear phone
conversation
• Press the VOL button to adjust the
volume to the desired listening level.
PAGING THE HANDSET
____________________________________________________________________
INSTALLATION NOTE: Some cordless telephones operate at frequencies that may
cause interference to nearby TVs and VCRs. To minimize or prevent such interference,
the base of the cordless telephone should not be placed near or on top of a TV or VCR.
If interference continues, moving the cordless telephone farther away from the TV or
VCR will often reduce or eliminate the interference.
Authorized Signature
Press the PAGE button on the base to locate a misplaced
Product Registration:
CHARGE/
IN USE
handset. When you press the PAGE button, the handset
CORDLESS PHONE BASICS
MAKING A CALL
After initial set up, put handset in the base for 12 hours to charge the battery.
The only two things you need to know to make a call are:
•
Please complete and mail the Product Registration Card packed with your
unit. It will make it easier to contact you should it ever be necessary.The
return of the card is not required for warranty coverage.
PAGE
beeps. Press the TALK button when you locate the
PAGE
You experience static,
• Change channels.
•
Attach the belt clip by inserting the
sides of the belt clip into the slots. Snap
the ends of the belt clip into place.
noise, or fading in and out • Is handset out of range? Move closer to
the base.
Slot for
belt clip
Slot for
belt clip
handset.
*Prices are subject to change without notice.
We bring good things to life.
button
NOTE: You can still page the handset with the
ringer off.
Total Merchandise.........................................$_______________
Sales Tax........................................................$_______________
• Does the base need to be relocated?
• Charge handset battery.
• Make sure base is not plugged into an
outlet with another household appliance.
Limitation of Warranty:
•
•
THE WARRANTY STATED ABOVE ISTHE ONLY WARRANTY APPLICABLETO
THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED
(INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO
VERBAL OR WRITTEN INFORMATION GIVEN BY ATLINKS USA, INC., ITS
AGENTS, OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY
INCREASETHE SCOPE OFTHIS WARRANTY.
REPAIR OR REPLACEMENT AS PROVIDED UNDERTHIS WARRANTY ISTHE
EXCLUSIVE REMEDY OFTHE CONSUMER. ATLINKS USA, INC. SHALL NOT
BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING
FROMTHE USE OFTHIS PRODUCT OR ARISING OUT OF ANY BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ONTHIS PRODUCT.THIS DIS-
CLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY
THE LAWS OFTHE STATE OF INDIANA. EXCEPTTOTHE EXTENT PROHIBITED
BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ONTHIS PRODUCT IS LIMITEDTO
THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
FCC REGISTRATION INFORMATION
We are required by law to collect the appropriate sales tax for each individual state,
county, and locality to which the merchandise is being sent.
CHANGING THE
BATTERY
Your telephone equipment is registered with the Federal Communications Commission and is in compliance with parts 15 and
CHANNEL BUTTON
If you ever experience any interference or don’t have clear voice quality, press the
CHAN button on the handset to advance to another channel.
68, FCC Rules and Regulations.
Notification to the Local Telephone Company
•
•
Press the TALK button before you dial.
Use VISA or Master Card or Discover preferably. Money order or check must be in U.S.
currency only. No COD or Cash. All accessories are subject to availability. Where
applicable, we will ship a superseding model.
Range is shorter
than normal
• Press the CHAN button during the
conversation to select a new channel.
• Position the base antenna upward.
1
Press TALK or place the handset in the base to hang up.
On the bottom of this equipment is a label indicating, among other information, the FCC Registration number and Ringer
Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone
company.
The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these
devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices
connected to one line should not exceed 5. To be certain of the number of devices you may connect to your line as
determined by the REN, you should contact your local telephone company.
Make sure the telephone is OFF before you replace battery.
IN USE INDICATOR
$5.00
Shipping/Handling....................................... $_______________
TALK
button
1. Remove the battery compartment door.
You know the phone is on when you see the IN USE
indicator on the handset light.
MEMORY
Battery will not hold a
charge or is fully charged
and the BAT LOW lights
• Be sure you are sufficiently charging the
battery. When the battery has been
charged for 12 hours, you can expect
approximately 4 hours of talk time.
• Check to be sure battery contacts on both
the handset and the base are making
contact and are clean; free of dirt or lint.
• When the handset is placed in the base,
check that the base CHARGE/IN USE
indicator is on.
Total Amount Enclosed.................................$_______________
INSTALLATION
TALK
CHAN
MUTE
2. Disconnect the cord attached to the battery pack and
remove the battery pack from the handset.
IN USE BA OW
MUTE
T
L
Mail order form and money order or check (in U.S. currency) made payable
to Thomson multimedia Inc. to:
RE/PA
FLASH
Store up to 10 numbers in memory for quick dialing.
Notes
•
•
ABC
JKL
DEF
1
4
2
5
8
0
3
2
REDIAL
CHAN button
This equipment may not be used on coin service provided by the telephone company.
5
6
3. Insert the new battery pack and connect the cord into the
jack inside the handset.
GHI
MNO
6
Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if you
Thomson multimedia Inc.
Mail Order Department
P.O. Box 8419
Press the TALK button, then press the RE/PA (redial/pause)
button to redial the last number you called (up to 32 digits).
PQRS
TUV
WXYZ
RE/PA
button
7
9
STORING A NUMBER IN
MEMORY
1. Make sure the phone is OFF.
2. Press the MEM button.
are on a party line. Check with your local telephone company.
4
TONE
OPER
#
*
•
Notice must be given to the telephone company upon permanent disconnection of your telephone from your line.
Rights of the Telephone Company
4. Put the battery compartment door back on.
OFF
•
•
ON
VOL
MEM
2
RINGER
3
5. Place handset in the base to charge. If you don’t charge
the handset battery properly (for 12 hours) when you first
set up the phone and/or when you install a new battery
pack, the battery’s long-term performance will be
compromised.
Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall,
where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not
practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service
immediately. In case of such temporary discontinuance, the telephone company must: (1) promptly notify you of such
temporary discontinuance; (2) afford you the opportunity to correct the situation; and (3) inform you of your right to bring a
complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations.
The telephone company may make changes in its communications facilities, equipment, operations or procedures where
such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations. If these
changes are expected to affect the use or performance of your telephone equipment, the telephone company must give
you adequate notice, in writing, to allow you to maintain uninterrupted service.
Ronks, PA 17573-8419
RECEIVING A CALL
To answer a call, you must press the TALK button before
you can talk.
How state law relates to this warranty:
Name_______________________________________________________
Address_____________________________________ Apt.____________
City ________________________State________ ZIP_________________
•
Some states do not allow the exclusion nor limitation of incidental or
consequential damages, or limitations on how long an implied warranty
lasts so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you also may have other
rights that vary from state to state.
BAT LOW indicator
stays on
• Place handset in base for 10 seconds to
reset the phone. If that doesn’t work,
charge battery for 12 hours.
3. Dial the number (up to 20 digits).
TALK
CHAN
MUTE
IN USE BA OW
MUTE
T
L
FLASH MUTE
button button
1
4. Press MEM.
RE/PA
FLASH
ABC
JKL
DEF
1
4
2
5
8
0
3
•
FLASH
5. Press any number key (0-9) to store the phone number
in that memory location.
GHI
MNO
BATTERY SAFETY PRECAUTIONS
6
Daytime Phone Number (
)_______________________________
PQRS
TUV
WXYZ
Memory Dialing
doesn’t work
• Did you program the memory location keys
correctly?
• Did you follow proper dialing sequence?
7
9
Use the FLASH button to activate custom calling services such
as Call Waiting or call transfer, which are available through
your local phone company.
If you purchased your product outside the USA:
• This warranty does not apply. Contact your dealer for warranty information.
TONE
OPER
•
Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type,
toxic materials could be released which can cause injury.
#
INTERFERENCE INFORMATION
*
OFF
•
•
ON
DESKTOP INSTALLATION
VOL
MEM
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference; and (2) This device must accept any interference received, including interference that may cause
undesired operation.
RINGER
CHANGING A STORED NUMBER
Use the same procedure to change a stored number as
you do to store a number— you’re just replacing the
phone number with a different number.
• Make sure the tone/pulse setting is
•
To reduce the risk of fire or personal injury, use only the battery listed in the User’s
Guide.
1. Make sure the mounting bracket is securely fastened.
2. Set the RINGER switch (on the handset) to ON.
programmed correctly.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
SERVICE
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
TIP: If you press the TALK button to activate custom calling
services such as call waiting, you’ll hang up the phone. Press
FLASH instead.
•
•
Keep batteries out of the reach of children.
Remove batteries if storing over 30 days.
Please make sure that this form has been filled out complet ely.
RE/PA
button
MEM button
Unit locks up and
no communication
between the base
and the handset
• If the phone still does not work,
disconnect the power cord and remove
the battery pack.Then reconnect the
power cord and reinstall the battery pack.
Place handset in the base for 10 seconds
to allow it to reinitialize.
• If a power outage occurs while the
handset is away from the base, the
handset must be returned to the base
when the power returns.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation.
3. Plug the power supply into the power jack on the back of base and the other end
into an AC outlet.
The FCC requires this product to be serviced only by the manufacturer or
its authorized service agents. In accordance with FCC requirements,
changes or modifications not expressly approved by ATLINKS USA, Inc.
could void the user’s authority to operate this product. For instructions on
how to obtain service, refer to the warranty included in this Guide or call
Consumer Information, 1-800-448-0329.
TALK
CHAN
IN USE BA LOW
T
MUTE
RE/PA
FLASH
MUTE
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
4. Place handset in the base to charge for 12 hours. The CHARGE/IN USE indicator (on
the base) comes on to indicate that the battery is charging. If you don’t charge the
handset battery properly (for 12 hours) when you first set up the phone, perfor-
mance of the battery will be compromised.
ABC
JKL
DEF
STORING A REDIAL NUMBER
1. Make sure the phone is OFF.
2. Press MEM.
1
4
2
5
8
0
3
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
GHI
MNO
6
•
•
•
Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is “receiving” the interference).
Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna.
NOTE: The RBRC seal on the battery used in your ATLINKS
USA product indicates that we are participating in a program to
collect and recycle Nickel Cadmium batteries throughout the
United States. Please call 1-800-8-BATTERY for information or
contact your local recycling center.
VOLUME
The VOL button controls the volume of the handset's
earpiece.
PQRS
TUV
WXYZ
7
9
TONE
OPER
#
Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is
*
OFF
•
•
ON
connected.
VOL
MEM
RINGER
5. Plug the telephone line cord into the TEL LINE jack on the back of the base and into
a modular phone jack.
3. Press RE/PA.
Or refer inquiries to:
ATLINKS USA, Inc.
Manager, Consumer Relations
P O Box 1976
Indianapolis, IN 46206
•
Consult the dealer or an experienced radio/TV technician for help.
If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician
for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, “How To Identify and
Resolve Radio/TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, D.C.
20402. Please specify stock number 004-000-00345-4 when ordering copies.
4. Press MEM.
6. Raise the base antenna.
RINGER SWITCH
The handset ringer switch can be set to ON or OFF. If the
switch is off, the unit will not ring.
5. Press any number key (0-9) to store the phone number in that memory location.
VOL button
RINGER–
ON OFF
switch
NOTE: The phone automatically defaults to touch-tone dialing. To change to pulse
(rotary) dialing, see “Tone/Pulse Dialing.” If you don’t know which type of service you
have, check with the phone company.
HEARING AID COMPATIBILITY
Attach your sales receipt to the booklet for future reference or jot down
the date this product was purchased or received as a gift.This information
will be valuable if service should be required during the warranty period.
This telephone system meets FCC standards for Hearing Aid Compatibility.
FCC NUMBER IS LOCATED ON THE CABINET BOTTOM
REN NUMBER IS LOCATED ON THE CABINET BOTTOM
CAUTION: Use only the ATLINKS USA 5-2501(black) or 5-2514( white) power
supply that came with this unit. Using other adapters may damage the unit.
Purchase date ____________________________
Name of store____________________________
ATLINKS USA, Inc.
Model 27600A
10330 North Meridian Street
15644590 (Rev. 2 E/S)
Indianapolis, IN 46290
01-21
© 2001 ATLINKS USA, Inc.
Printed in China
Trademark(s) ® Registered
Marca(s) Registrada(s)
|